Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter > Controls, Steering, and Trim Tabs

Part number for trim tilt on a 1974?

(1/2) > >>

kevinr:
What trim tilt assemblies...need part number(s)... fit a 1974 Evinrude model 115493b 115hp?

Thanks

fitz73222:
Marineengine.com has the part numbers.

kevinr:
I had found http://www.marineengine.com/parts/johnson-evinrude-accessories/index.php?year=1974&model=Electrical+1974&section=Power+Tilt+Kit-70+Long%2C+85%2C+115+%26amp%3B+135+Hp&yid=34223&mid=34224&sid=35746

But all I see are parts - not the part number for the entire assembly. My motor didn't come with one and I'd like to add one. I've seen the cmc stuff - a little pricey.

fitz73222:
Good luck with that. The trim system was from 1973 to 1977 as an accessory. You will need to hunt across the country for a complete unit. I had a complete assembly in stock about 20 years ago and sold it but even in those days it was rare that someone needed one.

kevinr:
will one from a 1976 135hp fit my 1974 115hp? if so, i may have found something local.

Navigation

[0] Message Index

[#] Next page