Classic AquaSport

Aquasport Model Rebuilds, Mods, Updates and Refreshes => Osprey Style Hull Rebuilds => 200 Rebuilds => Topic started by: uglystick on January 28, 2015, 04:48:31 PM

Title: 1987 Ospery 200
Post by: uglystick on January 28, 2015, 04:48:31 PM

Hi all,
I am adding a HB finder to the bow alongside the Minn Kota Riptide. Problem is the only 2 places to get electricity there is the trolling wire & the running light wire. So my question is where is the easiest place to run a new wire from my accessory switch on the console fuse to the bow? Is there a trace to the bow? I have added a 2008 Yama 150 blew the old one. Plus adding the I Pilot to the Riptide.
Thanks
P.S. Why are there so many 17s being rebuilt?

Title: Re: 1987 Ospery 200
Post by: gran398 on January 28, 2015, 05:04:26 PM

An easy method would be to use one of the existing wires as a pull....then pull the two wires you need plus one additional wire to replace the pull  :tu4: