You reached the limit of pages to see for today

Author Topic: Need pics of guage packages  (Read 1017 times)

December 17, 2009, 10:11:27 AM
Read 1017 times

Mark Sr

  • Information Offline
  • Posts: 183
Need pics of guage packages
« on: December 17, 2009, 10:11:27 AM »
I might be getting a restored 222 ccp hull.Nothing else but the hull.Console has nothing on it.Need pics of a 222 console with guages,steering.etc. Want to get an idea as where to place everything.

Mark Sr
Mark Sr
 
 \'98 Aquasport 245 Tournament Master

December 17, 2009, 12:28:11 PM
Reply #1

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6436
Re: Need pics of guage packages
« Reply #1 on: December 17, 2009, 12:28:11 PM »
Mark,
What year?
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

December 17, 2009, 01:54:39 PM
Reply #2

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Need pics of guage packages
« Reply #2 on: December 17, 2009, 01:54:39 PM »
Please and thank you work wonders, too... 8)


Corner of 520 and A1A...

December 17, 2009, 09:32:30 PM
Reply #3

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Re: Need pics of guage packages
« Reply #3 on: December 17, 2009, 09:32:30 PM »
Mark:  There are mainly 2 different versions of the CCP console, pre-81 and post-81.  So the year is somewhat important.  Later Genmar versions also had more changes.  What year model are you looking at?
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


December 18, 2009, 02:24:41 PM
Reply #4

Mark Sr

  • Information Offline
  • Posts: 183
Re: Need pics of guage packages
« Reply #4 on: December 18, 2009, 02:24:41 PM »
Sorry guys,it's a 1978.All holes in console where closed up and re-painted.

Mark Sr
Mark Sr
 
 \'98 Aquasport 245 Tournament Master

December 20, 2009, 05:38:06 PM
Reply #5

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Re: Need pics of guage packages
« Reply #5 on: December 20, 2009, 05:38:06 PM »
My 22-2CCP is an 80 model, about the same as your 78.  Here is about what yours looked like as original - I put in the radio setup and a few other changes, but the layout is pretty original:

 

See ya on the water!
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


December 20, 2009, 09:10:02 PM
Reply #6

Mark Sr

  • Information Offline
  • Posts: 183
Re: Need pics of guage packages
« Reply #6 on: December 20, 2009, 09:10:02 PM »
Thanks for the pic Capt'n. Are your batteries under the console.This boat has to be totally re wired.You wouldn't have a wiring diagram would you.L.O.L. Anything about the boat would help.
Thanks

Mark Sr
Mark Sr
 
 \'98 Aquasport 245 Tournament Master

December 21, 2009, 09:52:29 AM
Reply #7

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6436
Re: Need pics of guage packages
« Reply #7 on: December 21, 2009, 09:52:29 AM »
Quote from: Mark Sr
This boat has to be totally re wired.You wouldn't have a wiring diagram would you.L.O.L. Anything about the boat would help.
Thanks

Mark Sr

Here are a few places to start/ponder depending on what you eventually plan to do.

http://classicaquasport.com/smf/index.php?topic=3424.0

http://classicaquasport.com/smf/index.php?topic=1709.0

Try and avoid this
 

There's a lot more out there. The web has wiring plans (I believe one or more has been posted here) so take your time and make a game plan.

Good luck.
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

December 21, 2009, 10:04:00 AM
Reply #8

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Re: Need pics of guage packages
« Reply #8 on: December 21, 2009, 10:04:00 AM »
Never seen an Aquasport wiring diagram - I think they just ran the wiring as needed in the 70s and 80s.  :roll:  

But remember there were a lot fewer electronics then.  :scratch:  

So plan carefully and you can rewire and upgrade.  Most all the work will be in the console, with a couple new lines going to the motor and maybe forward if you intend to install a trolling motor in the future.  

Good luck and see ya on the water!
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


December 21, 2009, 10:49:35 AM
Reply #9

Mark Sr

  • Information Offline
  • Posts: 183
Re: Need pics of guage packages
« Reply #9 on: December 21, 2009, 10:49:35 AM »
Captn Bob

Thanks for the diagram.It's a start.I don't have the hull yet but this will give me time to think and figure things out.
Thanks all who contribute.
Merry Xmas

Mark Sr
Mark Sr
 
 \'98 Aquasport 245 Tournament Master

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal