Attention: Have 2 pages to see today

Author Topic: Kicker size for a 19-6  (Read 1062 times)

October 07, 2006, 08:06:00 PM
Read 1062 times

sturgeon

  • Information Offline
  • Posts: 20
Kicker size for a 19-6
« on: October 07, 2006, 08:06:00 PM »
I have a line on a 5 hp tohatsu for a great price as a kicker.  Is this enough to move this boat at hull speed? :?:
Sturgeon

October 07, 2006, 10:06:56 PM
Reply #1

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #1 on: October 07, 2006, 10:06:56 PM »
A 6 on my 170 pushed it at 4.5 knots.  Bigger boat & smaller engine you might squeeze out 3 kts.  I'd go for something bigger.  Make sure it's a long shaft.
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22

October 08, 2006, 07:33:10 PM
Reply #2

John Jones

  • Information Offline
  • Posts: 2829
(No subject)
« Reply #2 on: October 08, 2006, 07:33:10 PM »
I know, opinions are like ***holes but mine is that I had rather pay SeaTow $100/year rather than mess with a kicker that will never run when you need it to, not to mention the extra weight on a cut out transom.  I already got my money's worth this spring when I had a fuel problem (some bald headed old fart forgot to fill the tank  :oops: )  I had to pay for the gas and oil but that's it.  We were back fishing in 45 minutes.

My neighbor had a 9hp on an old 24' T-Craft.  It would not move it against a moderate wind (when it would run).
Politics have no relation to morals.
Niccolo Machiavelli

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal