Attention: Have only 1 page to see today

Author Topic: Bilge valve position instructions for 98 215 DC  (Read 158 times)

August 04, 2020, 11:06:58 PM
Read 158 times

Chip-ship

  • Information Offline
  • Posts: 2
Bilge valve position instructions for 98 215 DC
« on: August 04, 2020, 11:06:58 PM »
Just bought a 1998 Aquasport 215 DC .  I need to know the proper operation for the hand operated valve in the bilge and exactly what it does.
Does anyone know about this valve?
The previous owner doesn’t know. Is there any literature out there that I can access?
Thank You
Chip-Ship

August 05, 2020, 06:09:54 AM
Reply #1

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6429
Re: Bilge valve position instructions for 98 215 DC
« Reply #1 on: August 05, 2020, 06:09:54 AM »
Are you referring to this?
https://www.jmesales.com/bosworth-sea-lect-yv-094d-l-1-in-y-valve-w-aluminum-handle/?gclid=EAIaIQobChMIwq_GmOaD6wIVGYeGCh1regRjEAQYAiABEgJEZvD_BwE

Here's how it works.
https://www.youtube.com/watch?v=reumw6Yeb3I

Of course it's not used on your model as a sewer valve but rather a diverter for your raw water wash down and your live well. It lets you use one pump for both functions by "diverting" the water to the wash down or well.
I don't know offhand what position you need for each but trial and error would be a good way to find out when you have the hull in the water.

Good luck. :thumright:
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal