Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter > Plumbing
2004 215 osprey anchor locker drain
(1/1)
Joecephus1959:
My anchor locker plastic thru hull drain has broken off and i Can't find a replacement. I am hoping someone can help me find one...Thanks
Capt. Bob:
Does it look similar to this type?
https://www.wholesalemarine.com/t-h-marine-thru-hull-fittings-straight-white.html?gclid=Cj0KCQiArvX_BRCyARIsAKsnTxN-h5VpIHF-oCP4a6ubNd_noWm55ieuZr7Gx6s2-KaMDN0eBiKaFbYaAi6lEALw_wcB
Joecephus1959:
No it is one unit with the clam shell top.. the hole opening that the thru hull goes in is 3/4 inch...I hope you can see the one in the photo above the bow catch. the pic size is too big ...won't send
Capt. Bob:
Try reading this carefully.
https://classicaquasport.com/smf/index.php?topic=12725.0
Easiest way to post ANY SIZE FILE photo. The Forum does all the necessary sizing from your raw data.
I apologize but without the photo, I'm not sure what you're trying to find.
Navigation
[0] Message Index
Go to full version