Author Topic: Replacing throttle (Read 973 times)

hOAGART · « **on:** May 01, 2019, 06:08:06 AM »

Hello all, I have read a few pages back and done a search, but not finidng 100% what I need.

I have an '88 Osprey 20 with a 150 Johnson ('99ish) on back.
I am looking to replace the throttle control and cables. I purchased this from Leaders, but it is a touch larger than the original controls.
Is that typical, or is there a better option? I will need to widen the opening if I go this route

https://www.amazon.com/gp/product/B001KXTXWW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Thanks ... and May the Force be with you.

RickK · « **Reply #1 on:** May 01, 2019, 10:43:39 AM »

Yup, typical to have to rework the hole.

hOAGART · « **Reply #2 on:** May 01, 2019, 11:14:08 AM »

THanks. Seems like it may get a bit cramped with that unit and the shifter onthe left side now. Any other ideas that I may have missed?

RickK · « **Reply #3 on:** May 01, 2019, 03:21:59 PM »

The binnacle shifter is on the left side of the console now? I don't think I've seen one on the left before.

hOAGART · « **Reply #4 on:** May 02, 2019, 04:55:55 AM »

NO NO... left side of the binnacle box

RickK · « **Reply #5 on:** May 02, 2019, 05:26:31 AM »

Ahh, going to be close to the steering wheel.

Author Topic: Replacing throttle (Read 973 times)

hOAGART

Replacing throttle

RickK

Re: Replacing throttle

hOAGART

Re: Replacing throttle

RickK

Re: Replacing throttle

hOAGART

Re: Replacing throttle

RickK

Re: Replacing throttle