You reached the limit of pages to see for today

Author Topic: Miss Delmarva  (Read 54673 times)

May 09, 2014, 12:35:21 AM
Reply #1770

prudog45

  • Information Offline
  • Posts: 64
Re: Miss Delmarva Pics - at last - 1973 22-2 Rebuild
« Reply #1770 on: May 09, 2014, 12:35:21 AM »
Underway!!

-----------------------------------------
Ryan (aka prudog45) Member# 3169

May 09, 2014, 12:37:27 AM
Reply #1771

prudog45

  • Information Offline
  • Posts: 64
Re: Miss Delmarva Pics - at last - 1973 22-2 Rebuild
« Reply #1771 on: May 09, 2014, 12:37:27 AM »
And the GQ magazine Shot and my personal favorite... :D  Gran was gracious enough to allow me to take the helm. Miss D didn't hold back, she was a smooth ride, easy to drive, superior boat all the way around.  :cheers:

-----------------------------------------
Ryan (aka prudog45) Member# 3169

May 20, 2014, 12:23:01 PM
Reply #1772

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Miss Delmarva Pics - at last - 1973 22-2 Rebuild
« Reply #1772 on: May 20, 2014, 12:23:01 PM »
Since the Photogallery is now working marvelously, thought would post Prudog's pics. Thanks Ryan!

And thanks Avish!



Recently installed Bob's manual jackplates, 2.5 inch setback






May 20, 2014, 12:38:49 PM
Reply #1773

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Miss Delmarva Pics - at last - 1973 22-2 Rebuild
« Reply #1773 on: May 20, 2014, 12:38:49 PM »
I like the jackplate look, Scotty... :thumright:


Corner of 520 and A1A...

May 20, 2014, 09:22:11 PM
Reply #1774

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Miss Delmarva Pics - at last - 1973 22-2 Rebuild
« Reply #1774 on: May 20, 2014, 09:22:11 PM »
Thanks SB :thumright:

Been getting her fine-tuned. The twins were in the top hole, but the cav plates were still dragging. About an even inch too low, and killing the gas mileage.

Now that they're higher...she's throwing a clean wake, and the speed picked up just a tad per RPM over the cruise range.

Farley has been guiding/educating me on the nuances of prop pitch running twins on the 22-2. The 75's came off Miss Marco running Merc Vengeance 18P stainless props. However, they were revving too high. Merc recommends WOT on these engines at 4950 to 5250 RPM. Mercs in general love to rev, but on these they spec lower RPM's at WOT. At present, one engine is showing 5600, the other 5650 to 5700 at WOT. The present props are underpitched.

So....per Farley, Propgod's , and the techs at Powertech....going to order a set of 3 blade 5/16ths ported Powertech stainless 19P's. Should increase the speed a hair at WOT, but with max RPM's around 5200. Should lower 29 mph cruise from 4400 to around 3900-4000 RPM. Hope so anyway. Gas mileage should be better....hopefully around 2.5 mpg at cruise.

October 14, 2014, 04:37:44 PM
Reply #1775

slvrlng

  • Information Offline
  • Posts: 1817
Re: Miss Delmarva 1973 22-2 Rebuild
« Reply #1775 on: October 14, 2014, 04:37:44 PM »
Lewis
       1983 222 Osprey "Slipaway"
       1973 19-6 "Emily Lynn"
      

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal