Attention: Have 2 pages to see today

Author Topic: Cracked hull on 1984 CC Osprey 222  (Read 837 times)

February 12, 2008, 11:04:45 AM
Read 837 times

fm69912

  • Information Offline
  • Posts: 10
Cracked hull on 1984 CC Osprey 222
« on: February 12, 2008, 11:04:45 AM »
I have a crack in the hull of my 1984 CC Osprey 222. It's looks like it is on the left edge of where the gas tank is. Could it be a broken stringer? The crack is about 3 ft long. I'm assuming that I need to take out the tower, CC, seat/baitwell. Cut the floor and remove the gas tank. I'm pretty handy, but not a boat builder. Is it something that I can do with some help and how long should it take?
Genisis 1:26 Then God said, "Let us make man in our image, in our likeness, and let them rule over the fish of the sea..."

February 12, 2008, 11:50:32 AM
Reply #1

LilRichard

  • Information Offline
  • Master Rebuilder
  • Posts: 1244
(No subject)
« Reply #1 on: February 12, 2008, 11:50:32 AM »
Need some pics please - does the crack run along the chine, or is it perpendicular to the hull line?

If you are reasonable skilled in other facets - you should be able to complete this.  Take a look at the rebuilds here and on Classic Mako - both sites have guys doing similar things.

How long it takes depends on your schedule.  I took mine down to the bare hull and will have two years into when I am done (ugh).  If it's a delam crack and does not involve the stringers, you might only be into it for a month or two.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal