Attention: Have 2 pages to see today

Author Topic: Fuel Tanks Question  (Read 335 times)

October 24, 2023, 06:55:12 PM
Read 335 times

rhtrades

  • Information Offline
  • Posts: 54
Fuel Tanks Question
« on: October 24, 2023, 06:55:12 PM »
Does anyone know:

Is the Poly Fuel Tank in a 215 Explorer "foamed in", so  if water happens to get thru say the access plate, it would have no where to go and therefore soak into or stand next to the foam?  Or are there gaps somewhere around the tank so the water could eventually leak into the bilge?   

Or maybe they are not foamed in at all?

October 25, 2023, 08:51:09 PM
Reply #1

mattleach2114

  • Information Offline
  • Posts: 10
Re: Fuel Tanks Question
« Reply #1 on: October 25, 2023, 08:51:09 PM »
Not sure if it's the same but there was no foam in my '92 210 Explorer

October 26, 2023, 09:48:40 AM
Reply #2

rhtrades

  • Information Offline
  • Posts: 54
Re: Fuel Tanks Question
« Reply #2 on: October 26, 2023, 09:48:40 AM »
Thank you!

June 29, 2024, 07:12:14 AM
Reply #3

tkcogs

  • Information Offline
  • Posts: 7
Re: Fuel Tanks Question
« Reply #3 on: June 29, 2024, 07:12:14 AM »
Need some advice….How to properly secure my replacement Moeller 35G plastic Poly tank in the old fuel coffin well….  Here are some pictures of the tank and fuel well on my 1974 19-6.  Open to lotsa advice..
1974 19-6 Osprey

July 02, 2024, 01:32:09 PM
Reply #4

tkcogs

  • Information Offline
  • Posts: 7
Re: Fuel Tanks Question
« Reply #4 on: July 02, 2024, 01:32:09 PM »
Any recommendations?
1974 19-6 Osprey

July 03, 2024, 03:48:18 PM
Reply #5

dbiscayne

  • Information Offline
  • Posts: 290

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal