Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter > Controls, Steering, and Trim Tabs
Trim tabs on 215 osprey
(1/1)
Joecephus1959:
Hi all, newbie here.. I have a 2004 215 osprey dc and was wanting to install trim tabs on her. I don't know if I should install 18x9 or 24x9. Next problem is the new placement of the transducer as it's in the way of the tab on the starboard side. Any help would be appreciated.
Capt. Bob:
Rule of thumb is to install the largest size tab that will fit properly.
Here's a little light reading.
https://classicaquasport.com/smf/index.php?topic=9830.msg85408#msg85408
Good luck. :thumright:
mshugg:
12x12 would give you the same surface area as 9x18 and give you more options for transducer location. I had 12x12 Bennett hydraulics on my 20 foot Hydrasport and my 23 foot ProLine. It was a good size for both hulls. Now I have 12 x12 Bennet Bolts on my CCP. They work great and the instal is easier than hydraulic.
Joecephus1959:
Thanks, that makes sense..I am going out now to re measure for another fit....
:scrHead:
Navigation
[0] Message Index
Go to full version