Attention: Have only 1 page to see today

Author Topic: 2003 250 Explorer Wiring Diagram needed  (Read 261 times)

June 01, 2022, 12:07:50 PM
Read 261 times

jmozzy98

  • Information Offline
  • Posts: 1
2003 250 Explorer Wiring Diagram needed
« on: June 01, 2022, 12:07:50 PM »
Hi Folks,
Looking for a wiring diagram for my 2003 250 Explorer.
Any recommendations would be helpful.
Thanks
Ron

June 01, 2022, 03:51:23 PM
Reply #1

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6429
Re: 2003 250 Explorer Wiring Diagram needed
« Reply #1 on: June 01, 2022, 03:51:23 PM »
Ron,
I have not seen a model specific wiring diagram for Aquas. We do have some generic manuals with wiring color coding that might help but no actual schematics.

https://classicaquasport.com/smf/index.php?topic=13047.msg131354#msg131354

]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

October 07, 2023, 08:32:08 AM
Reply #2

koning

  • Information Offline
  • Posts: 2
Re: 2003 250 Explorer Wiring Diagram needed
« Reply #2 on: October 07, 2023, 08:32:08 AM »
I have this boat lost all my lights to a hauler hitting a bridge and my livewell doesn't work.  Relatively easy repairs?  I'm a little scared the marina its at for the winter will charge me thousands to fix this so I need to somehow take elsewhere.

October 07, 2023, 04:50:11 PM
Reply #3

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11065
Re: 2003 250 Explorer Wiring Diagram needed
« Reply #3 on: October 07, 2023, 04:50:11 PM »
Do you have the ability to work on the boat while at the marina? If so, grab a multimeter and test everything on the fuse block for voltage. It's not hard to troubleshoot.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

October 08, 2023, 11:18:40 PM
Reply #4

koning

  • Information Offline
  • Posts: 2
Re: 2003 250 Explorer Wiring Diagram needed
« Reply #4 on: October 08, 2023, 11:18:40 PM »
Do you have the ability to work on the boat while at the marina? If so, grab a multimeter and test everything on the fuse block for voltage. It's not hard to troubleshoot.

I think they put a door in the shrink wrap I assume I can do stuff like that or light cleaning.  Great tip thanks!


 

SimplePortal 2.3.5 © 2008-2012, SimplePortal