Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter > Props
Factory Inboard Prop Dimensions for 22-2
(1/1)
Capt. Bob:
Mod Note: I took this post from our Classified forum for future reference. :ScrChin:
The props are a 14x11, and a 13x14. Taper of the shaft hole of both props is 0.980" at the rear and 0.820" at the front. Rudder shaft is 1" diameter.
theFunsmith:
If I can get you any more dimensions, let me know.
Navigation
[0] Message Index
Go to full version