Author Topic: rudder ports for 29 ' (Read 1052 times)

takeoff29 · « **on:** March 08, 2011, 07:59:54 PM »

looking to buy two 1 1/4" id square base top side mount rudder ports with packing nut for a 29 aquasport.any info would be helpful thank you. 8)

takeoff29 · « **Reply #1 on:** March 08, 2011, 08:01:35 PM »

or any info as to what brand they used, the year is a 1982 29 aquasport

seabob4 · « **Reply #2 on:** March 09, 2011, 12:05:58 AM »

I would say Buck Algonquin was probably the vendor. We used them on Stamas I/Bs, give them a call. If they weren't the supplier, they can probably set you up with a close match...

takeoff29 · « **Reply #3 on:** March 10, 2011, 06:35:00 PM »

i glass beaded my port and found they were made by PERKO but i don't think they make them any more .cannot find any info on them from perko .I may end up with the buck algonquin and mod. them if i cannot find direct replacments thank you seebob4

seabob4 · « **Reply #4 on:** March 10, 2011, 07:05:58 PM »

takeoff,
Should you have to mod, keep in mind bronze is difficult to cut, you need sharp blades, best done on a band saw...

takeoff29 · « **Reply #5 on:** March 13, 2011, 08:22:52 PM »

thanks for the info seebob4

Author Topic: rudder ports for 29 ' (Read 1052 times)

takeoff29

rudder ports for 29 '

takeoff29

Re: rudder ports for 29 '

seabob4

Re: rudder ports for 29 '

takeoff29

Re: rudder ports for 29 '

seabob4

Re: rudder ports for 29 '

takeoff29

Re: rudder ports for 29 '