General Aquasport Forums > Aquasport Discussion

Aquasport 222 flat back shell or hull question

(1/2) > >>

KWM:
The actual hull is all fiberglass correct? no wood?? I can not remember...??

RickK:
The transom has wood and the floor is end grain balsa encapsulated in fiberglass. The stringers are fiberglass filled with foam.

KWM:
Thanks Rick! Great info. The outside shell of the hull was all fiberglass over a mold correct?

RickK:
Yup, made from a mold - this includes the flatback. There is a pic or two of the actual build up from the mold but I can't find it.  Maybe our Moderator can.

Ulysses485:
Do you have one your getting started to rebuild? Lets see some photos  :cheering2:

I'm deep in the middle of a flatback 222 rebuild (amongst many others  :41:) and my starting point was reading the old rebuild threads as time allowed. There are a lot of great photos and specific details that will help guide you through. You can see them here :
https://classicaquasport.com/smf/index.php?board=39.0

Mine is located here:
https://classicaquasport.com/smf/index.php?topic=15666.0
You will see the stringer grid layout in post #22.

Navigation

[0] Message Index

[#] Next page