Aquasport Model Rebuilds, Mods, Updates and Refreshes > Osprey Style Hull Rebuilds

Motor-well trim (Hull/Deck joint) for 1996 Osprey 215 DC

(1/1)

Snowman12523:
Restoring a 1996 215 Osprey DC.  The plastic "U" shaped trim that conceals the hull/deck joint in the motor well is cracked.  Anyone have a source for replacement or suggested solutions?

Thank you!

Todd

Capt. Bob:
I used one side of mine to have an aluminum piece fabricated at a metal works shop. Then I had them create a mirror image for the opposite side. The original section under the motor is still in place.

You can see the new piece to the right of the motor (port side) and the original plastic (faded yellow) underneath.



Same section from the back.


It's just mirrored on the starboard side.

Good luck.

Snowman12523:
Thank you Capt. Bob! I will check with a local metal shop - was hoping someone had found the magic well of old Aquasport parts out there!

Todd

Navigation

[0] Message Index