You reached the limit of pages to see for today

Author Topic: Rickk's Windlass Install  (Read 9910 times)

March 31, 2012, 10:27:27 AM
Reply #45

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11066
Re: boatersland.com sale...AND Windlass Install
« Reply #45 on: March 31, 2012, 10:27:27 AM »
Just before the gathering I had time to figure out how to reinforce the windlass on the aft side.  Put a 1" thick peice of oak the width of the underside of the channel, then put a strip of 1/8" aluminum on top of that and snugged some washers & nylocs down on it.  I think it provided the reinforcement it needed. Used it on the gathering - worked great, a wonderful purchase.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal