1
2
Aquasport Discussion / 86 250ccp main fuel tank dimensions.« Last post by jetfiremuck on Today at 07:24:42 PM »I think Ive a main tank leak. Hoping to get a poly tank to replace if possible. Anyone have the tank dimensions under the console ? TIA.
3
Classified / Re: Found on CL Maine 1987 270xf« Last post by RickK on Today at 02:37:27 PM »It's hard to tell what this is - a 250Osprey ('cept they didn't make one in 87)? A 271 Osprey? Around this time AS made some "one-of"s. They made a 280/281 Osprey in '88/89 but that thing was a beast. They also made a 270 Osprey.
It could be a 280... Doesn't quite look the profile though. Notice the beam - 9' 7.5" It's not an XF - here is what one of them look like 4
Generic Aquasport Rebuilding Topics / Re: 1973 196 rebuild question« Last post by umecheme on Today at 01:45:20 PM »My 19-1 liner was attached at the top with bonding putty.... for like the top 4"... it was a mess to take out, destroyed the liner.
5
Generic Aquasport Rebuilding Topics / Re: 1973 196 rebuild question« Last post by dbiscayne on Today at 10:18:15 AM »My '71 liner was only attached at the top by the rub rail screws, it stops just short of the cap. At the bottom it's a continuous part of the deck/glassed.
Just a small 1/4" at most gap between the liner and hull side. Seems they had a mold for the liner and deck when constructed. 7
Aquasport Discussion / Re: 1986 Osprey 200 Hull Number not legible on transom« Last post by RickK on Today at 05:39:13 AM »You might look under the rub rail on the port side toward the aft.
8
Paints, topsides and bottom and Gelcoat Topics / Re: Bottom Paint Advice« Last post by RickK on Today at 05:37:41 AM »Yup, mine looked the same. Get it blasted off.
9
Paints, topsides and bottom and Gelcoat Topics / Re: Bottom Paint Advice« Last post by Scode68 on April 28, 2024, 07:54:25 PM »10
Paints, topsides and bottom and Gelcoat Topics / Re: Bottom Paint Advice« Last post by Scode68 on April 28, 2024, 04:35:39 PM »[https://i.postimg.cc/zG4LqLz5/20240428_151543.jpg]
|