Aquasport Model Rebuilds, Mods, Updates and Refreshes > Other Classic Rebuilds

Classic proline 20 rebuild

(1/5) > >>

backdraft1887:
Hello everyone my name is evan and i recently bought a old flatback proline. I statrted the process of cutting the liner and floor out. and she sits on a cradle i bulit for the overhall. My plans are a half tower with enclosed transom and porta bracket. Ive lurked on her for a long time and finally decided to get my hand dirty. Look forward to any advise along the way!

Heres her new home for a while...

Deck Daddy:
I like the cradle. Building the same thing for my rebuild to work on her in the garage this winter. Good luck with the build, those 20's have nice lines.

RickK:
If you do the rebuild anything like the cradle, it'll be a stout boat. :thumleft:

backdraft1887:
Here are some more pics



This is after i cut the liner out, looks like someone had reglassed the front part of the floor once


Heres the beginning of gutting her

backdraft1887:
Got the rest of the floor out and most of the foam. I went to lift the cap from the transom and the other owner had glassed it to the hull. should i just cut it off with a cut off wheel?

Navigation

[0] Message Index

[#] Next page