Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter > Trailers
2004 explorer 250
(1/1)
phnguyk:
Does anybody know the bow eye to drain plug length? Setting up a new to me trailer, I know the running hull length is 24' 6". Should I use that?
Ulysses485:
24'-6'' is going to be the overall length of the boat from the transom to the tip of the bow. You would subtract the distance from the bow eye to the tip of the bow from that length to get what you are looking for. Are you setting up the trailer yourself or having a trailer manufacturer do it?
phnguyk:
--- Quote from: Ulysses485 on October 19, 2022, 11:18:52 AM ---24'-6'' is going to be the overall length of the boat from the transom to the tip of the bow. You would subtract the distance from the bow eye to the tip of the bow from that length to get what you are looking for. Are you setting up the trailer yourself or having a trailer manufacturer do it?
--- End quote ---
The 250 has a LOA of 26' 6". I'm doing it myself, I've done it before on other boats, but unfortunately this boat is new to me and in the water, getting measurements is tough. But knowing I could subtract from the bow eye to the bow pulpit it'll be easier and get me close. 72 rollers, 31ft (overall) 8k trailer. Thanks
Navigation
[0] Message Index
Go to full version