Attention: Have 2 pages to see today

Author Topic: Loose Pilot House Bolts  (Read 257 times)

June 05, 2021, 11:13:14 PM
Read 257 times

SantaCruzAqua

  • Information Offline
  • Posts: 2
Loose Pilot House Bolts
« on: June 05, 2021, 11:13:14 PM »
Greetings!

I recently purchased a 19’6’’ Aquasport Osprey. I believe it is 1988. A previous owner built out a plywood pilot house that is still in decent shape that is secured to the deck with lag bolts. When I took it for my first sea trial it quickly became apparent that all the bolts on the starboard side are stripped and the ones one the front and port side are showing signs of loosening. I am not sure if they are drilled into the stringers.

I have been looking into my different options for fixes. It is my understanding that with this hull there is no access below deck to install backing plates of through bolts without rebuilding the deck.

I am looking for advice on possible fixes that wouldn’t require rebuilding the deck and would greatly appreciate anyone pointing me in the right direction.

I fish in Monterey  Bay and it’s not uncommon for me to fish in rough weather so having weak points in the pilot house anchors will quickly become a problem.

Thanks

June 06, 2021, 07:49:26 AM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11065
Re: Loose Pilot House Bolts
« Reply #1 on: June 06, 2021, 07:49:26 AM »
Welcome aboard SCA  :welcome01:
Pics would help us help you. One thought comes to mind - glass it right to the deck
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

June 07, 2021, 01:18:15 PM
Reply #2

SantaCruzAqua

  • Information Offline
  • Posts: 2
Re: Loose Pilot House Bolts
« Reply #2 on: June 07, 2021, 01:18:15 PM »






June 08, 2021, 06:20:26 AM
Reply #3

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11065
Re: Loose Pilot House Bolts
« Reply #3 on: June 08, 2021, 06:20:26 AM »
Can we see a pic of the inside of the console?
Remember if using a phone to take pics, to hold the phone horizontal with the lens to the left.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

June 08, 2021, 10:28:50 AM
Reply #4

Fishhead

  • Information Offline
  • Posts: 147
Re: Loose Pilot House Bolts
« Reply #4 on: June 08, 2021, 10:28:50 AM »
Yea, when I mounted the Farallon pilothouse to my 230 years ago i glassed a flange on the inside about 3” wide, bedded, lagged and caulked both sides to keep water out.
19-6 family fisherman
24 osprey pilothouse
22-2 family fisherman

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal