Attention: Have 2 pages to see today

Author Topic: Starting rebuild on 22-2...1968?  (Read 787 times)

July 18, 2020, 07:23:57 AM
Reply #15

Tampa Bay Mike

  • Information Offline
  • Master Rebuilder
  • Posts: 579
Re: Starting rebuild on 22-2...1968?
« Reply #15 on: July 18, 2020, 07:23:57 AM »
Cool. Yeah, I would definitely get some support under that hull before you get much further. And take a lot of measurements. The stringers are the backbone of the boat and it will flex a lot once they are out. If you're not careful you could end up locking in a bad twist or hook in the hull when you put them back down which will cause a lot of problems.

July 22, 2020, 03:48:01 PM
Reply #16

Matt76

  • Information Offline
  • Posts: 13
Re: Starting rebuild on 22-2...1968?
« Reply #16 on: July 22, 2020, 03:48:01 PM »
Has anyone put a larger helm console on their 22-2 flatback? I would like a head compartment. Thinking of stretching helm forwards and leaving floor cut out for head? Any ideas? Small cuddy cabin?

July 22, 2020, 03:50:45 PM
Reply #17

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11066
Re: Starting rebuild on 22-2...1968?
« Reply #17 on: July 22, 2020, 03:50:45 PM »
Usually it's the other way around, they make it smaller to make it easier to get by or to fit it under a tower.
Maybe make a dodger and put a porta potty in it?
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

July 22, 2020, 03:53:42 PM
Reply #18

Matt76

  • Information Offline
  • Posts: 13
Re: Starting rebuild on 22-2...1968?
« Reply #18 on: July 22, 2020, 03:53:42 PM »
Dodgers are nice. Also thinking of more seating on a longer console.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal