Attention: Have only 1 page to see today

Author Topic: project started  (Read 10410 times)

December 12, 2007, 12:05:16 PM
Reply #30

Undertow2

  • Information Offline
  • Posts: 127
(No subject)
« Reply #30 on: December 12, 2007, 12:05:16 PM »
Those little tunnel John Boats with jets will do that all day long.  Add the Mud motor to it and you can walk over even less.  A LOT of people in the Yankeetown area use this type rig.
My Banshee could follow that boat right over the ankle deep water, but only for 30-45 seconds as the water intakes are most decidedly out of the water.  Sometimes I have to hop from pothole to pothole.

December 13, 2007, 12:08:33 AM
Reply #31

slippery73

  • Information Offline
  • Master Rebuilder
  • Posts: 317
(No subject)
« Reply #31 on: December 13, 2007, 12:08:33 AM »
Not saying the box wont work, just saying you are much more likely to have cavitation issues with the square box method. I would definately say I would  at least roll that front edge into the tunnel so it flows more naturally into the tunnel, the two sides having the sharp edges might help the boat to track better. Kind of trial and error really, no perfect way to build a tunnel. Looks like good progress anyways. Keep us posted on how it turns out.

December 13, 2007, 01:24:00 PM
Reply #32

fabuck71

  • Information Offline
  • Posts: 209
(No subject)
« Reply #32 on: December 13, 2007, 01:24:00 PM »
Looks good, I've been with my buddy who has a house in Pine Island, and you boys fly around there where the grass is sticking out of the water.  You go boy!  Make sure you put a kill switch in that tower  :wink:
Alex Buck
Bass Underwriters of Florida
800.528.5386

March 09, 2009, 07:56:05 PM
Reply #33

71flatback

  • Information Offline
  • Posts: 94
Re: project started
« Reply #33 on: March 09, 2009, 07:56:05 PM »
Hey guys, I finally got back to work on the flatback. I have a few pics from last week. I've done quite a bit since then, and i'll get new pictures as soon as i  find my camera.







1971 aquasport 22-2 flatback, Work in progress

March 11, 2009, 11:10:42 PM
Reply #34

71flatback

  • Information Offline
  • Posts: 94
Re: project started
« Reply #34 on: March 11, 2009, 11:10:42 PM »
Front deck is done and a couple layers of mat on the transom so far.







1971 aquasport 22-2 flatback, Work in progress

March 12, 2009, 05:36:16 AM
Reply #35

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11097
Re: project started
« Reply #35 on: March 12, 2009, 05:36:16 AM »
:thumleft:
What is the box for?
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

March 12, 2009, 06:50:15 PM
Reply #36

71flatback

  • Information Offline
  • Posts: 94
Re: project started
« Reply #36 on: March 12, 2009, 06:50:15 PM »
The box under the tower is for the batteries and wiring since it's only gonna have an upper station for now.  The box in the back really won't have much in it except the fuel filter, but it's gonna be a seat too.
1971 aquasport 22-2 flatback, Work in progress

August 04, 2009, 01:28:16 PM
Reply #37

71flatback

  • Information Offline
  • Posts: 94
Re: project started
« Reply #37 on: August 04, 2009, 01:28:16 PM »
The boats painted (awl-grip) inside and out. Aristo blue on the outside and cloud white inside. I get to start rigging it soon







1971 aquasport 22-2 flatback, Work in progress

August 04, 2009, 02:31:41 PM
Reply #38

slvrlng

  • Information Offline
  • Posts: 1817
Re: project started
« Reply #38 on: August 04, 2009, 02:31:41 PM »
Man that thing is slick! My problem when I paint one and get it looking like that I always autograph it here and there. What did the tunnel end up looking like?
Lewis
       1983 222 Osprey "Slipaway"
       1973 19-6 "Emily Lynn"
      

August 04, 2009, 06:31:40 PM
Reply #39

71flatback

  • Information Offline
  • Posts: 94
Re: project started
« Reply #39 on: August 04, 2009, 06:31:40 PM »
Tunnel ended up good. I still have to paint it and part of the bottom. We sprayed as much of the sides and bow as we could without laying under it, and i'm gonna roll and tip the rest. I got my paralift mounted today. I'll get some pics of the transom up tomarrow.
1971 aquasport 22-2 flatback, Work in progress

August 04, 2009, 06:43:44 PM
Reply #40

slvrlng

  • Information Offline
  • Posts: 1817
Re: project started
« Reply #40 on: August 04, 2009, 06:43:44 PM »
So you live on Pine island? I used to live on Manasota Key in Sarasota Co. right above the Charlotte co. line. I miss that, being able to fish right in front of the house after work. My old girlfriend lived on Burnt store rd in Punta Gorda. Back in the sixties my great uncle bought about 200 acres on Pine island but he sold it. Man I wish I still had that!
Lewis
       1983 222 Osprey "Slipaway"
       1973 19-6 "Emily Lynn"
      

August 04, 2009, 07:55:10 PM
Reply #41

ANTIBLING

  • Information Offline
  • Posts: 103
Re: project started
« Reply #41 on: August 04, 2009, 07:55:10 PM »
Not a fan of that blue, but definatly looks like a beautiful job. well done man! lets see pics of the paralift and what are your tower plans?
87\' 170 striper

August 04, 2009, 08:01:44 PM
Reply #42

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11097
Re: project started
« Reply #42 on: August 04, 2009, 08:01:44 PM »
:shock:  :thumleft:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

August 07, 2009, 09:26:35 AM
Reply #43

LilRichard

  • Information Offline
  • Master Rebuilder
  • Posts: 1244
Re: project started
« Reply #43 on: August 07, 2009, 09:26:35 AM »
I actually like that color - looks good!

August 08, 2009, 05:46:40 PM
Reply #44

71flatback

  • Information Offline
  • Posts: 94
Re: project started
« Reply #44 on: August 08, 2009, 05:46:40 PM »
I got the motor, swim platform, and stern eyes all mounted. I'm gonna run the 115 i had for now and eventually go to a 150. It's finally starting to shape up a little.







1971 aquasport 22-2 flatback, Work in progress

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal