Author Topic: Aquasport 222 flat back shell or hull question (Read 205 times)

KWM · « **on:** March 15, 2024, 05:33:47 PM »

The actual hull is all fiberglass correct? no wood?? I can not remember...??

RickK · « **Reply #1 on:** March 17, 2024, 05:33:34 AM »

The transom has wood and the floor is end grain balsa encapsulated in fiberglass. The stringers are fiberglass filled with foam.

KWM · « **Reply #2 on:** March 17, 2024, 08:12:49 AM »

Thanks Rick! Great info. The outside shell of the hull was all fiberglass over a mold correct?

RickK · « **Reply #3 on:** March 17, 2024, 02:57:09 PM »

Yup, made from a mold - this includes the flatback. There is a pic or two of the actual build up from the mold but I can't find it. Maybe our Moderator can.

Ulysses485 · « **Reply #4 on:** March 18, 2024, 12:18:59 PM »

Do you have one your getting started to rebuild? Lets see some photos

I'm deep in the middle of a flatback 222 rebuild (amongst many others

) and my starting point was reading the old rebuild threads as time allowed. There are a lot of great photos and specific details that will help guide you through. You can see them here :
https://classicaquasport.com/smf/index.php?board=39.0

Mine is located here:
https://classicaquasport.com/smf/index.php?topic=15666.0
You will see the stringer grid layout in post #22.

KWM · « **Reply #5 on:** April 03, 2024, 01:12:13 PM »

Thanks guys!! Good info. Looking at buying one completed.

Author Topic: Aquasport 222 flat back shell or hull question (Read 205 times)

KWM

Aquasport 222 flat back shell or hull question

RickK

Re: Aquasport 222 flat back shell or hull question

KWM

Re: Aquasport 222 flat back shell or hull question

RickK

Re: Aquasport 222 flat back shell or hull question

Ulysses485

Re: Aquasport 222 flat back shell or hull question

KWM

Re: Aquasport 222 flat back shell or hull question