Menu
You reached the limit of pages to see for today
« previous next »
Pages: 1   Go Down

Author Topic: 222 Centerconsole inboard  (Read 1117 times)

March 22, 2008, 08:27:50 PM
Read 1117 times

Thomas70

  • Information Offline
  • Posts: 15
222 Centerconsole inboard
« on: March 22, 2008, 08:27:50 PM »
I've found a 222 centerconsole inboard are these common. Are they worth anything?
Logged
March 22, 2008, 10:50:00 PM
Reply #1

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Inboards
« Reply #1 on: March 22, 2008, 10:50:00 PM »
They were rare and highly valued for deeper-water use.  As with any boat, it's worth whatever someone is willing to pay...   :roll:

The inboard model with the engine under the console was just so - cool!  It has advanages today in being very fuel efficient and still perform well.  

Aquasport inboards were few and far between, but have proven thenselves many times as tenders and offshore fishing vessels with great seaworthyness and capability.
Logged
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209

April 09, 2008, 08:18:19 AM
Reply #2

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #2 on: April 09, 2008, 08:18:19 AM »
I have one and love it.  Only downside is the shaft/prop/rudder are vulnerable to damage if you ground the boat or hit something submerged.  Original power (I believe) was a small block Ford V8.  Mine has a Chrysler 318.  Please post some pictures if available.
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
April 09, 2008, 09:24:15 AM
Reply #3

LilRichard

  • Information Offline
  • Master Rebuilder
  • Posts: 1244
(No subject)
« Reply #3 on: April 09, 2008, 09:24:15 AM »
Woh!  Jim - you're back!
Logged
April 09, 2008, 12:39:04 PM
Reply #4

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #4 on: April 09, 2008, 12:39:04 PM »
Alive & kicking.  Sometimes it's good for me to push back from the table for a bit.

The 22-2 inboard, for me, is just right.  Engine is accessible & cheap to replace if it packs it in ($2000 will buy a rebuilt engine with gear) Also, it's located in the sweet spot where the weight should be.  Mine has a dozy deck but that project will be held off 'til the 240 is done.  

Concerning worth, if the boat is cosmetically "challenged" but is otherwise structurally sound & usable, in this market $2500 might be a fair price... possibly less.  Again, if you post some pictures maybe the group here can toss some opinions your way.
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
April 09, 2008, 01:17:13 PM
Reply #5

LilRichard

  • Information Offline
  • Master Rebuilder
  • Posts: 1244
(No subject)
« Reply #5 on: April 09, 2008, 01:17:13 PM »
Quote from: "LilRichard"
Woh!  Jim - you're back!


You been lurking, or just busy with other stuff?

  :cheers:
Logged
April 09, 2008, 09:26:56 PM
Reply #6

Miguel

  • Information Offline
  • Panama
  • Posts: 292
(No subject)
« Reply #6 on: April 09, 2008, 09:26:56 PM »
Hello again, Jim!!!
Looks like we've been away for a while.  I still log in every day, but don´t have time to reply.  Busy as hell :evil:
Logged
Miguel
1985 Osprey 170 / 1992 115HP Mariner
[/url]
April 10, 2008, 06:31:13 PM
Reply #7

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11083
(No subject)
« Reply #7 on: April 10, 2008, 06:31:13 PM »
Glad to see you back from that short vacation Jim  8)
We've had a few questions on inboards since you took a break that could have used your experience.
Try not to be gone so long next time buddy  :wink:
You too Miquel - this site's supposed to give you that time to relax and be low-key :wink:
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
Pages: 1   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal