Classic AquaSport

Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter => Controls, Steering, and Trim Tabs => Topic started by: kevinr on July 05, 2020, 06:41:58 PM

Title: converting old control cables to threaded teleflex?
Post by: kevinr on July 05, 2020, 06:41:58 PM

bought a new single binnacle universal throttle. my cable ends at the console look like the attached picture. one is basically bare wire. the other has the old coupler from a very old evinrude shifter. the new throttle wants the threaded ends.

Question - i'd like to reuse these cables with my new universal throttle. can i convert these cables and if so with what parts?

Thanks. Kevin

Title: Re: converting old control cables to threaded teleflex?
Post by: RickK on July 17, 2020, 12:25:16 PM

Sorry for the delayed response but I frankly have no idea. Sorry.