Menu
Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: 115 inline 6cyl  (Read 2025 times)

March 10, 2005, 07:02:18 PM
Read 2025 times

Deck Daddy

  • Information Offline
  • Posts: 74
115 inline 6cyl
« on: March 10, 2005, 07:02:18 PM »
Does anyone have any experiences with the mid 80's merc 115 inline 6. Have a chance to pick one up for peanuts, good compression, needs a stator. Any comments good or bad greatly appreciated. Thanks
Logged
One boat at a time.
March 11, 2005, 08:29:06 AM
Reply #1

Radioshop

  • Information Offline
  • Posts: 167
(No subject)
« Reply #1 on: March 11, 2005, 08:29:06 AM »
Corrosion was a big issue on old black motors.  They were also pretty noisy.  The cowling arrangement was goofy.  The inline six was bulletproof.  For nothing or, next to nothing, it'd be something to pick up.
Logged
1973 22.2 Osprey - Sand Bar II
Miamuh, Florida
March 11, 2005, 12:36:07 PM
Reply #2

Deck Daddy

  • Information Offline
  • Posts: 74
(No subject)
« Reply #2 on: March 11, 2005, 12:36:07 PM »
Radioshop, thanks for the reply. It is next for nothing, with all controls and guages and prop. He just wants to get it off his boat to repower. I have made some calls and I am getting the same response. Looks like my current project will be getting a merc. Thanks
Logged
One boat at a time.
March 11, 2005, 01:45:57 PM
Reply #3

Jerry-rigged

  • Information Offline
  • Posts: 13
(No subject)
« Reply #3 on: March 11, 2005, 01:45:57 PM »
If you need parts, or just advice on re-building an old Merc, check out http://www.themarinedoctor.com/cgi-bin/YaBB.pl.  I believe this guy is out of Canada.

I check into his page every week or so just to read about motors people are re-building.

Classic Hull with a Classic I-6 Merc, What could be sweeter?

Jerry
Logged
March 11, 2005, 02:48:58 PM
Reply #4

Deck Daddy

  • Information Offline
  • Posts: 74
(No subject)
« Reply #4 on: March 11, 2005, 02:48:58 PM »
Jerry-rigged, great site. Sucked me in for a good hour and will probably suck me in for a few more this evening after a run to the package store. Unfortunatly this engine will not be going on my 72 17' AS. She has a 90 yam. I will be putting the merc in a 18' Romarine. Great little boat, 18' with an 8' beam. Stable as they come. Just need something to rebuild, 17 is complete. Thanks DD
Logged
One boat at a time.
Pages: 1   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal