21
22
Fuel tanks and anything about fuel systems / 2003 215 Explorer fuel tank depth« Last post by Hshirokmann on April 21, 2024, 02:21:36 PM »I need to replace my fuel sender and just wondering if anyone knows the tank depth for the 100 gal tank. I have not removed the original sender yet to measure. Thanks!
Howard 23
165/170/175 Rebuilds / Re: ‘77 Aquasport 170« Last post by RickK on April 21, 2024, 01:57:59 PM »Seems the anti-cavitation plate is even with the bottom of the hull so I think it is good.
Also, remember if using a phone to take pics, to hold the phone horizontal with the lens to the left. If you hold the phone vertical, the pictures post like the one above. 24
Electronics / Re: Primer Solenoid« Last post by Hshirokmann on April 21, 2024, 01:09:12 PM »Capt. Bob,
Thanks for the info. I tested the solenoid resistance and found it was good, and I replaced the key switch which resolved my issue. Thanks for the info. Howard 25
165/170/175 Rebuilds / ‘77 Aquasport 170« Last post by Mfolsom on April 21, 2024, 09:34:12 AM »I am looking for advice on the way the motor is mounted on mine.
Is this a problem? Should I lower it or add a shim or just leave it there? This is the way I received it. https://classicaquasport.com/smf/index.php?board=28.0 26
Aquasport Discussion / Re: Stop Lurking and Start Posting!! Introduce Yourself Here!« Last post by RickK on April 20, 2024, 03:46:30 PM »I don't see a good pic of the transom and the engine mount.
I advise you to start a new topic on this forum and keep all your questions in that topic/thread. https://classicaquasport.com/smf/index.php?board=28.0 In the new topic post a pic that shows us what you're asking about. You have already done the hard part of posting pics, by getting the pics to your gallery. Follow the instructions in this thread and start reading at #8. https://classicaquasport.com/smf/index.php?topic=12725.0 27
Aquasport Discussion / Re: Stop Lurking and Start Posting!! Introduce Yourself Here!« Last post by Mfolsom on April 20, 2024, 07:19:31 AM »I just added a couple more pics to the gallery. I have a question about the way the motor is mounted. Is the gap a problem and what should I do to correct it? It looks like the mount height is correct at the lower.
https://classicaquasport.com/gallery/showgallery.php?cat=500&ppuser=138636 28
Aquasport Discussion / Re: Stop Lurking and Start Posting!! Introduce Yourself Here!« Last post by Capt. Bob on April 19, 2024, 02:49:49 PM »29
240 Rebuilds / Re: 1974' Aquasport 240 CC Rebuild« Last post by RickK on April 19, 2024, 12:26:59 PM »30
Aquasport Discussion / Re: Stop Lurking and Start Posting!! Introduce Yourself Here!« Last post by RickK on April 19, 2024, 12:23:17 PM » aboard MFolsom
Here is a link to your gallery https://classicaquasport.com/gallery/showgallery.php?cat=500&ppuser=138636 |