Attention: Have only 1 page to see today

Author Topic: 1993 175 osprey questions ( paging DR Sea Bob)  (Read 3131 times)

January 21, 2011, 05:28:59 PM
Reply #15

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #15 on: January 21, 2011, 05:28:59 PM »
I see nothing shocking in those pics except for that trim piece,i don't like that,the rest just looks like a 17 year old bilge,that should clean up, and I've seen a lot worse skegs.
Is the motor a 93 as well,i would do what Pete said and find a third party to check the motor out so you won't have any surprises.
And i would almost bet that yellow is not factory,I'm looking to get a 17 hopefully this year and i would consider that boat myself for the price,but remember a lot of times with a used purchase things aren't what they seemed to be after you get it home.
Scott
1997 225 Explorer

January 21, 2011, 05:43:20 PM
Reply #16

pete

  • Information Offline
  • Posts: 1420
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #16 on: January 21, 2011, 05:43:20 PM »
what scared me was all this corrosion.....





and the bilge looking like this means to me that it wasn't very well cared for,sure it can be cleaned up,but why wasn't it be fore it was put on the mkt

just looking out for a new member,I've been wrong before,just ask my wife :salut:
2003  Osprey 225
Palm Bay FL

January 21, 2011, 06:14:23 PM
Reply #17

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #17 on: January 21, 2011, 06:14:23 PM »
Pete your right on that corrosion that enlarged pick made a difference for me,i wonder if all those stainless screws in that aluminum might be the cause,the two metals don't really mix.
Your also right about the bilge,i couldn't stand that on my boat but probably nothing wrong there ,just ugly, but it always amazes me what people won't do or not clean to sell something,like the mold boat you posted,at the very least pay the neighbor kid to wash it before you try to sell it,sometimes a little elbow grease go's along way.
Scott
1997 225 Explorer

January 22, 2011, 02:29:08 PM
Reply #18

seaped

  • Information Offline
  • Posts: 9
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #18 on: January 22, 2011, 02:29:08 PM »
thanks for all the input it, every bit helps. i am going to have a marine engineer come
with me next week to look it over and advise on further action.




what am i looking at here? this is a picture of the deck hatch behind the center console. looks neglected. and what is the spring for?

January 22, 2011, 04:38:38 PM
Reply #19

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #19 on: January 22, 2011, 04:38:38 PM »
Quote from: "seaped"
thanks for all the input it, every bit helps. i am going to have a marine engineer come
with me next week to look it over and advise on further action.




what am i looking at here? this is a picture of the deck hatch behind the center console. looks neglected. and what is the spring for?

What you are looking at is the fuel sender and the fuel pickup, with a shut-off valve coming off it...

What is this "spring" you are talking about?


Corner of 520 and A1A...

January 22, 2011, 05:08:49 PM
Reply #20

fitz73222

  • Information Offline
  • Mechanical Master
  • Posts: 1957
    • http://www.hudson-technologies.com/.
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #20 on: January 22, 2011, 05:08:49 PM »
Man I hate to bust your bubble,

That boat suffers from classic galvanic corrosion. That trim piece is a tell tail sign. It is in contact with the outboard which probably looks the same way on the inside water passages and exhaust baffle plate. She sat in salt water too long without without the zinc anodes being maintained and the galvanic activity has migrated through the outboard an on to the trim piece. Unless you can buy it for nothing, keep looking. At a minimum that Merc is swiss cheese on the inside. That boat has been neglected. Plan on a new engine and complete wiring job to get her back to square one. I've been around salt water my whole life and have seen this many times before. There is a ton of really nice seventeens for sale out there with your name on them.
1973 Aquasport 22-2, twin 115 Mercs
2000 Baycraft 175 flats boat, 60 Bigfoot Merc
1968 Boston Whaler 13, 25 Yamaha (project)
1966 Orlando Clipper 13, 9.9 Merc

January 22, 2011, 05:53:02 PM
Reply #21

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #21 on: January 22, 2011, 05:53:02 PM »
Quote from: "fitz73222"
Man I hate to bust your bubble,

That boat suffers from classic galvanic corrosion. That trim piece is a tell tail sign. It is in contact with the outboard which probably looks the same way on the inside water passages and exhaust baffle plate. She sat in salt water too long without without the zinc anodes being maintained and the galvanic activity has migrated through the outboard an on to the trim piece. Unless you can buy it for nothing, keep looking. At a minimum that Merc is swiss cheese on the inside. That boat has been neglected. Plan on a new engine and complete wiring job to get her back to square one. I've been around salt water my whole life and have seen this many times before. There is a ton of really nice seventeens for sale out there with your name on them.

Gotta agree...and I would just LOVE to break loose those engine bolts without several days application of PB...


Corner of 520 and A1A...

January 22, 2011, 06:18:39 PM
Reply #22

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #22 on: January 22, 2011, 06:18:39 PM »
seaped, the boys just saved you some good money. Am sure you're thankful...and as Fitz says, there are plenty out there. Hang tight.

January 22, 2011, 07:32:55 PM
Reply #23

Aswaff400

  • Information Offline
  • Master Rebuilder
  • Posts: 1627
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #23 on: January 22, 2011, 07:32:55 PM »
my main concern would be that outboard, looks like its been left in the water on more than one occasion, i bet trying to break those bolts loose on the lower unit would be a pain in the a$$ if the boat wasnt properly maintained/ lubed. i want to say mercs use studs instead of bolts like on yamaha/omc, salt/corrosion builds up around the studs, and have to use a torch and a hammer/wedge just to break that unit loose... if paying someone to service the water pump that will run the cost of service up... oh and im willing to bet theres some water in the lower unit, if not, the dealer already drained and refilled trying to hide something...


i see this kind of stuff in the marina all the time, one thing our mechanic always says: "when re-assembling, theres no such thing as too much grease"
Aaron
1996 200 Osprey SOLD
1968 22-2 Flatback SOLD
1993 210 Explorer SOLD
1991 Fountain 31TE SOLD
1989 Fountain 12-meter SOLD
1992 Talon F-20 SOLD
2021 Fountain 38TE QUAD 400's

January 22, 2011, 08:51:35 PM
Reply #24

seaped

  • Information Offline
  • Posts: 9
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #24 on: January 22, 2011, 08:51:35 PM »
Quote from: "fitz73222"
Man I hate to bust your bubble,

That boat suffers from classic galvanic corrosion. That trim piece is a tell tail sign. It is in contact with the outboard which probably looks the same way on the inside water passages and exhaust baffle plate. She sat in salt water too long without without the zinc anodes being maintained and the galvanic activity has migrated through the outboard an on to the trim piece. Unless you can buy it for nothing, keep looking. At a minimum that Merc is swiss cheese on the inside. That boat has been neglected. Plan on a new engine and complete wiring job to get her back to square one. I've been around salt water my whole life and have seen this many times before. There is a ton of really nice seventeens for sale out there with your name on them.


you guys have not bursted my bubble. This is exactly why i joined the forum. Im wondering if i should cancel the appointment with the marine mechanic and just back out. The marina notified me  today that the loading ramp is blocked with snow. so no sea trial how can i buy a boat if i cant even see it float lol?  watcha ya gonna do? i think ill have a beer now.  :beer:

January 22, 2011, 08:57:05 PM
Reply #25

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #25 on: January 22, 2011, 08:57:05 PM »
Quote from: "seaped"
Quote from: "fitz73222"
Man I hate to bust your bubble,

That boat suffers from classic galvanic corrosion. That trim piece is a tell tail sign. It is in contact with the outboard which probably looks the same way on the inside water passages and exhaust baffle plate. She sat in salt water too long without without the zinc anodes being maintained and the galvanic activity has migrated through the outboard an on to the trim piece. Unless you can buy it for nothing, keep looking. At a minimum that Merc is swiss cheese on the inside. That boat has been neglected. Plan on a new engine and complete wiring job to get her back to square one. I've been around salt water my whole life and have seen this many times before. There is a ton of really nice seventeens for sale out there with your name on them.


you guys have not bursted my bubble. This is exactly why i joined the forum. Im wondering if i should cancel the appointment with the marine mechanic and just back out. The marina notified me  today that the loading ramp is blocked with snow. so no sea trial how can i buy a boat if i cant even see it float lol?  watcha ya gonna do? i think ill have a beer now.  :beer:

You mean BEER!!!


Corner of 520 and A1A...

January 22, 2011, 10:20:06 PM
Reply #26

pete

  • Information Offline
  • Posts: 1420
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #26 on: January 22, 2011, 10:20:06 PM »
Thats the spirit!!!!Beer will make you feel better!CHEERS! :salut:
2003  Osprey 225
Palm Bay FL

January 23, 2011, 07:54:41 AM
Reply #27

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6429
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #27 on: January 23, 2011, 07:54:41 AM »
Quote from: "pete"
Thats the spirit!!!!Beer will make you feel better!CHEERS! :salut:

Yes, it will also make the boat look better. :roll:

hey, it works for women, why not boats  :wink:  

I'm just sayin'
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

January 23, 2011, 11:01:33 AM
Reply #28

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 1993 175 osprey questions ( paging DR Sea Bob)
« Reply #28 on: January 23, 2011, 11:01:33 AM »
:cheers:

hey seaped...we've got a cool moderator too, huh?

 :lol:

So cancel the surveyor, cancel the sale, getcha some cool ones.....and watch the awesome games today!

 :cheers:

(Jets vs. Packers, Super Bowl)

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal