Welcome, Guest
Login
Register
Search
Home
Forum
Help
Site Rules
Advertise
Login
Register
Menu
Home
Forum
Help
Site Rules
Advertise
Login
Register
Classic AquaSport
/
General Aquasport Forums
/
Aquasport Discussion
/
Design Question?
Attention: Have only 1 page to see today
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: Design Question? (Read 1273 times)
February 19, 2009, 06:13:59 PM
Read 1273 times
miamiguy
Information
Posts:
24
Design Question?
«
on:
February 19, 2009, 06:13:59 PM »
How were the 1988 Aquasports (222 in particular) built? Do they have alot of wood in them? Was there any major issues with production that year?
Thanks!
Logged
February 20, 2009, 09:31:17 AM
Reply #1
LilRichard
Information
Master Rebuilder
Posts:
1244
Re: Design Question?
«
Reply #1 on:
February 20, 2009, 09:31:17 AM »
Hull has wood in transom and floor, no issues I am aware of. Plenty still running around.
Logged
February 21, 2009, 09:27:02 AM
Reply #2
GoneFission
Information
Mechanical Master
Posts:
3479
Re: Design Question?
«
Reply #2 on:
February 21, 2009, 09:27:02 AM »
I believe by 1988 the Aquasport line was wood-free (or at least that is what they advertised). Earlier ones had wood in transoms and under decks.
Hope this helps - see ya on the water!
Logged
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209
February 21, 2009, 10:29:04 AM
Reply #3
LilRichard
Information
Master Rebuilder
Posts:
1244
Re: Design Question?
«
Reply #3 on:
February 21, 2009, 10:29:04 AM »
GF - really? I trust you on the later models - I really did think they were wood up until the early 90s?
Take his word on the newer hulls - I would.
Logged
February 21, 2009, 09:39:52 PM
Reply #4
GoneFission
Information
Mechanical Master
Posts:
3479
Re: Design Question?
«
Reply #4 on:
February 21, 2009, 09:39:52 PM »
Advertisment is, well, advertisement! Aquasport pushed the fact that stringers were all fiberglass, but if you look carefully at the ad from 87-88, you will note the deck and transom look like wood - brown color - and the transom says "sealed" - not composite or solid fiberglass. Check it out:
http://www.classicaquasport.com/gallery ... 574/page/1
So there's some wiggle room there. All I know is that my 80 model CCP has wood under some deck areas and in the transom. Although AS advertised a no-wood boat at times, I'm not sure exactly when wood went away from the transom and some deck areas. Maybe SeaBob knows...
Regarding wood, remember, I had a classic Cris-Craft Constellation - 6 tons of Mahogany - and kept her 20 years, so some wood is not a big deal for me - just take care of it and it will take care of you, and ain't nothing that's prettier than a nice piece of finished, quality wood!
See ya on the water!
Logged
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209
February 22, 2009, 06:13:20 AM
Reply #5
RickK
Information
Administrator
Posts:
11278
Re: Design Question?
«
Reply #5 on:
February 22, 2009, 06:13:20 AM »
My '92 230 has a wood transom. Not sure what the sole is made of. End-grain Balsa?
SeaBob said earlier that they poured all the transoms when he was there. So it must have started around '94.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)
1992 230 Explorer with 250 Yamaha
March 01, 2009, 02:46:51 PM
Reply #6
damnitbadger
Information
Posts:
137
Re: Design Question?
«
Reply #6 on:
March 01, 2009, 02:46:51 PM »
My 1988 222-CCP had a wood transom (2 pieces of 3/4" poorly laminated together) and the wood puzzle piece cored deck. The transom is now composite bluewater board (1-1/2"). First chance I get the floor will be Coosa board as well.
Logged
Beware the lolipop of mediocrity, lick it once and you will suck forever!
88\' CCP 222 w/200 EFI Merc
March 01, 2009, 04:08:41 PM
Reply #7
seabob4
Information
Rigging Master
Posts:
9087
Re: Design Question?
«
Reply #7 on:
March 01, 2009, 04:08:41 PM »
Coosa "Bluewater"=Excellent stuff
That's the way to do it!
Logged
Corner of 520 and A1A...
March 01, 2009, 11:32:41 PM
Reply #8
damnitbadger
Information
Posts:
137
Re: Design Question?
«
Reply #8 on:
March 01, 2009, 11:32:41 PM »
Here's my transom job.
viewtopic.php?f=2&t=1783
Logged
Beware the lolipop of mediocrity, lick it once and you will suck forever!
88\' CCP 222 w/200 EFI Merc
Print
Pages:
1
Go Up
« previous
next »
Classic AquaSport
/
General Aquasport Forums
/
Aquasport Discussion
/
Design Question?
SimplePortal 2.3.5 © 2008-2012, SimplePortal