Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: 1972 22-2 Rebuild  (Read 793 times)

December 03, 2016, 04:52:47 PM
Read 793 times

jerryh3

  • Information Offline
  • Posts: 14
1972 22-2 Rebuild
« on: December 03, 2016, 04:52:47 PM »
Officially "started" on the boat today.  Looks like I have some work ahead of me...



Logged
December 03, 2016, 05:18:26 PM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11283
Re: 1972 22-2 Rebuild
« Reply #1 on: December 03, 2016, 05:18:26 PM »
Good start.  An air chisel will make short business of the core.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
December 03, 2016, 05:54:58 PM
Reply #2

jerryh3

  • Information Offline
  • Posts: 14
Re: 1972 22-2 Rebuild
« Reply #2 on: December 03, 2016, 05:54:58 PM »
Quote from: RickK on December 03, 2016, 05:18:26 PM
Good start.  An air chisel will make short business of the core.

I might have to try that.  I picked up a couple of these to try out.
http://www.harborfreight.com/4-1-2-half-inch-carbide-cup-wheel-66613.html
Logged
December 04, 2016, 07:21:00 AM
Reply #3

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11283
Re: 1972 22-2 Rebuild
« Reply #3 on: December 04, 2016, 07:21:00 AM »
I haven't tried those - I use their flap sanding wheels - 24 and 40 grit.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
December 04, 2016, 04:35:24 PM
Reply #4

jerryh3

  • Information Offline
  • Posts: 14
Day 2
« Reply #4 on: December 04, 2016, 04:35:24 PM »
Only had an hour or two to mess around with it today.  Chipped away at more of the transom and took a sander to the hull blisters to see what I'm dealing with.



Logged
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal