Attention: Have 2 pages to see today

Author Topic: Hard top’s  (Read 473 times)

March 10, 2018, 11:25:26 PM
Read 473 times

joe b graham

  • Information Offline
  • Posts: 18
Hard top’s
« on: March 10, 2018, 11:25:26 PM »
Where can I find a prefabricated fishing tower for my 225 explorer.or is there nothing prefabricated thanks

March 11, 2018, 09:52:29 AM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11066
Re: Hard top’s
« Reply #1 on: March 11, 2018, 09:52:29 AM »
Hi Joe, you might luck into something that is close at a surplus place but usually it's all custom made.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

March 12, 2018, 11:32:45 AM
Reply #2

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


March 12, 2018, 03:06:22 PM
Reply #3

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: Hard top’s
« Reply #3 on: March 12, 2018, 03:06:22 PM »
You might find something at Atlantic tower or something like that.  Otherwise your looking at custom made.  Sometimes you see a boat being parted out.  I can tell you the factory hardtop for the 225/245/250 is a sweet hardtop.  I did see one that had a tower on top added.
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal