Attention: Have 2 pages to see today

Author Topic: 1987 Ospery 200  (Read 750 times)

January 28, 2015, 04:48:31 PM
Read 750 times

uglystick

  • Information Offline
  • Posts: 27
1987 Ospery 200
« on: January 28, 2015, 04:48:31 PM »
Hi all,
I am adding a HB finder to the bow alongside the Minn Kota Riptide. Problem is the only 2 places to get electricity there is the trolling wire & the running light wire. So my question is where is the easiest place to run a new wire from my accessory switch on the console fuse to the bow? Is there a trace to the bow? I have added a 2008 Yama 150 blew the old one. Plus adding the I Pilot to the Riptide.
Thanks
P.S. Why are there so many 17s being rebuilt?

January 28, 2015, 05:04:26 PM
Reply #1

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 1987 Ospery 200
« Reply #1 on: January 28, 2015, 05:04:26 PM »
An easy method would be to use one of the existing wires as a pull....then pull the two wires you need plus one additional wire to replace the pull  :tu4:

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal