Menu
You reached the limit of pages to see for today
« previous next »
Pages: 1 2 3 4 5 ... 23   Go Down

Author Topic: 72 FB build  (Read 36599 times)

April 03, 2010, 05:00:14 PM
Reply #30

dirtwheelsfl

  • Information Offline
  • Master Rebuilder
  • Posts: 808
Re: 72 FB build
« Reply #30 on: April 03, 2010, 05:00:14 PM »
Quote from: "RickK"
Quote from: "RickK"
The transom almost looks like it has a masonite outer in the pics  :cyclops:
So what am I looking at on the outside of the transom?  Are the pics of you laying in a new outer fiberglass skin? or is this the transom that you laminated together?  Like I said, it looks like masonite. Maybe the marine plywood doesn't have much grain.  :scratch:
What's the next step? Lay glass across the entire back outside and down the sides of the hull where it's ground down?

yes its the one i laminated and bagged...
im not sure why itlooks like that, its 2 layers of biax over the ply so you cant really see the grain, and i think the sun being on it in the pic washes itout or something. next itll get glassed on the outside all the way around just like the inside, possibly a whole nother layer across the back after, keep some fairing work down possibly...
Logged
April 13, 2010, 06:30:19 PM
Reply #31

dirtwheelsfl

  • Information Offline
  • Master Rebuilder
  • Posts: 808
Re: 72 FB build
« Reply #31 on: April 13, 2010, 06:30:19 PM »
shot of cap recore and cap glassed to the inside of the hull (hard to see under all the dust)



chine stringers out..





front section of center stringer out



nice gash in the bottom of the hull, underneath the center stringer. must be where the gallon of water inside the stringer came frm




new glass getting layed in the chines and the front, alog with some bow eye/stem work this weekend..
Logged
April 13, 2010, 07:46:37 PM
Reply #32

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11081
Re: 72 FB build
« Reply #32 on: April 13, 2010, 07:46:37 PM »
:thumleft:  Lookin' good
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
April 13, 2010, 09:51:29 PM
Reply #33

thennutts

  • Information Offline
  • Master Rebuilder
  • Posts: 228
Re: 72 FB build
« Reply #33 on: April 13, 2010, 09:51:29 PM »
Looking good buddy! Stay after it! :afro:
Logged
April 14, 2010, 08:53:20 PM
Reply #34

dirtwheelsfl

  • Information Offline
  • Master Rebuilder
  • Posts: 808
Re: 72 FB build
« Reply #34 on: April 14, 2010, 08:53:20 PM »
^ trying...  funds are hurting
Logged
April 27, 2010, 08:21:34 PM
Reply #35

dirtwheelsfl

  • Information Offline
  • Master Rebuilder
  • Posts: 808
Re: 72 FB build
« Reply #35 on: April 27, 2010, 08:21:34 PM »
layed some 1708 in the chines, and pulled evrything else out (almost by hand).
got a line on some corecell to start making stringers and bulkheads. now to get intimate with my grinder...









^just curious as to what these holes are for? not the windows, but the small hole to the left and forward of it, theres 4 of em spaced evenly apart right in front of the windows...
Logged
April 27, 2010, 08:51:39 PM
Reply #36

Marcq

  • Information Offline
  • Posts: 600
Re: 72 FB build
« Reply #36 on: April 27, 2010, 08:51:39 PM »
Nice progress man :salut:

Marc..
Logged
1979 170 Aquasport 70hp Evinrude
June 06, 2010, 06:56:58 PM
Reply #37

dirtwheelsfl

  • Information Offline
  • Master Rebuilder
  • Posts: 808
Re: 72 FB build
« Reply #37 on: June 06, 2010, 06:56:58 PM »
more progress: full layer of glass in the hull, overlapped in the keel, extending up past where the floor is going to be, and 3 layers to plug up the windows. 1" 5# corecell stringers cut out and ready to get glued and glassed in. also built a console. starting to look like something now...
Logged
June 07, 2010, 07:54:21 PM
Reply #38

dirtwheelsfl

  • Information Offline
  • Master Rebuilder
  • Posts: 808
Re: 72 FB build
« Reply #38 on: June 07, 2010, 07:54:21 PM »
nice new layer of glass to work off of now..



windows





stringers being finished up  (mind the nasty glasswork on the starboard side transom)



console:



Logged
June 07, 2010, 09:16:09 PM
Reply #39

slvrlng

  • Information Offline
  • Posts: 1817
Re: 72 FB build
« Reply #39 on: June 07, 2010, 09:16:09 PM »
That is looking great!  :thumleft:
Logged
Lewis
       1983 222 Osprey "Slipaway"
       1973 19-6 "Emily Lynn"
      
June 15, 2010, 08:18:26 PM
Reply #40

dirtwheelsfl

  • Information Offline
  • Master Rebuilder
  • Posts: 808
Re: 72 FB build
« Reply #40 on: June 15, 2010, 08:18:26 PM »
stringers getting laminated: 2 layers of 1708 on each side



yes i glass in sandals when i can
Logged
June 16, 2010, 12:33:20 AM
Reply #41

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 72 FB build
« Reply #41 on: June 16, 2010, 12:33:20 AM »
Real clean....nice work.

Keep the pics coming. Thanks!
Logged
June 24, 2010, 08:10:01 PM
Reply #42

dirtwheelsfl

  • Information Offline
  • Master Rebuilder
  • Posts: 808
Re: 72 FB build
« Reply #42 on: June 24, 2010, 08:10:01 PM »
ready to be capped and tabbed into the boat

Logged
July 01, 2010, 04:47:50 PM
Reply #43

dirtwheelsfl

  • Information Offline
  • Master Rebuilder
  • Posts: 808
Re: 72 FB build
« Reply #43 on: July 01, 2010, 04:47:50 PM »
capped and tabbed...





sorry for some reason the glass ive been getting lately doesnt have a square edge on it. dont worry its not layed in or capped crooked



time for bulkheads and tank(s) and fun stuff. nice to be putting stuff in the boat anyways
Logged
July 01, 2010, 09:27:55 PM
Reply #44

Marcq

  • Information Offline
  • Posts: 600
Re: 72 FB build
« Reply #44 on: July 01, 2010, 09:27:55 PM »
Wow, this is nice and clean  :salut:

Marc..
Logged
1979 170 Aquasport 70hp Evinrude
Pages: 1 2 3 4 5 ... 23   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal