Attention: Have 2 pages to see today

Author Topic: Refurbish 1981 200 CCP  (Read 32095 times)

July 16, 2007, 10:43:56 AM
Reply #120

jdupree

  • Information Offline
  • Posts: 959
(No subject)
« Reply #120 on: July 16, 2007, 10:43:56 AM »
I am getting ready to re-finish the teak.  I have browsed thru some threads but I am looking for a quick, simple way to re-finish.  First off, was going to pressure wash and let the teak dry out.  What will I need for a pretty quick job that will give me some good results :?:   I figured that I would start with the swim platform that I am in the process of fixing.  Thanks.
John L. Dupree, III
1999 Aquasport 245 Explorer - 225 Johnson Ocean Pro
AQABLA84E999
Member #257

July 16, 2007, 11:06:18 AM
Reply #121

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #121 on: July 16, 2007, 11:06:18 AM »
Is there any finish on the teak now?
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22

July 16, 2007, 11:10:32 AM
Reply #122

jdupree

  • Information Offline
  • Posts: 959
(No subject)
« Reply #122 on: July 16, 2007, 11:10:32 AM »
Does not appear to have.  Just looks like an old deck that has been sitting out in the weather for a long time.
John L. Dupree, III
1999 Aquasport 245 Explorer - 225 Johnson Ocean Pro
AQABLA84E999
Member #257

July 16, 2007, 12:35:07 PM
Reply #123

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #123 on: July 16, 2007, 12:35:07 PM »
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22

February 10, 2009, 09:52:23 PM
Reply #124

kaptainkoz

  • Information Offline
  • Posts: 523
    • http://www.stevenkozlowski.com
Re: Refurbish 1981 200 CCP
« Reply #124 on: February 10, 2009, 09:52:23 PM »
I used the Sikkens Cetol also, awesome stuff, I highly recommend it. Goes on well and seems to wear like iron.
1979 246 CCP project boat in development, Jones Inlet-Long Island NY
Steven Kozlowski. Captainkoz@aol.com

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal