You reached the limit of pages to see for today

Author Topic: converting old control cables to threaded teleflex?  (Read 232 times)

July 05, 2020, 06:41:58 PM
Read 232 times

kevinr

  • Information Offline
  • Posts: 35
converting old control cables to threaded teleflex?
« on: July 05, 2020, 06:41:58 PM »
bought a new single binnacle universal throttle. my cable ends at the console look like the attached picture. one is basically bare wire. the other has the old coupler from a very old evinrude shifter. the new throttle wants the threaded ends.

Question - i'd like to reuse these cables with my new universal throttle. can i convert these cables and if so with what parts?

Thanks. Kevin

July 17, 2020, 12:25:16 PM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11065
Re: converting old control cables to threaded teleflex?
« Reply #1 on: July 17, 2020, 12:25:16 PM »
Sorry for the delayed response but I frankly have no idea. Sorry.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal