You reached the limit of pages to see for today

Author Topic: 1984 222 CCP  (Read 16990 times)

August 26, 2012, 11:31:53 AM
Reply #15

fabuck71

  • Information Offline
  • Posts: 209
Re: 1984 222 CCP
« Reply #15 on: August 26, 2012, 11:31:53 AM »
They told me not to leave in any longer than 3-4 days you are correct.  I never leave my boats in the water at all longer than 3 days.  I don't know how many coast but will ask.  I would guess 3-4.
Alex Buck
Bass Underwriters of Florida
800.528.5386

August 26, 2012, 06:47:24 PM
Reply #16

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11066
Re: 1984 222 CCP
« Reply #16 on: August 26, 2012, 06:47:24 PM »
Reason I ask is I will be rebuilding my 170 and am going back and forth on whether to re-gel the outside of the hull or go with paint. I don't usually leave the boat in the water overnight but once I rebuild and give it some real ways to drain water I won't have to worry if I do leave it in and it rains. I'm looking for the slickest finish.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

August 26, 2012, 09:30:22 PM
Reply #17

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 1984 222 CCP
« Reply #17 on: August 26, 2012, 09:30:22 PM »
Rick, the way the gel turned out on my junk, and the pics are decent, but to look at even better....I'd go with the gel. You get dock rash, scratches etc...you can mash a buffer on it, not a problem. And should go 20 years easy.

In the meantime, and you mentioned slick....its like looking in a mirror.

August 26, 2012, 11:07:10 PM
Reply #18

fabuck71

  • Information Offline
  • Posts: 209
Re: 1984 222 CCP
« Reply #18 on: August 26, 2012, 11:07:10 PM »
I think Awlgrip is a two part epoxy paint.  I don't know much about it but I do know they mix the paint with a thinner and activator.
Alex Buck
Bass Underwriters of Florida
800.528.5386

September 04, 2012, 03:59:33 PM
Reply #19

fabuck71

  • Information Offline
  • Posts: 209
Re: 1984 222 CCP
« Reply #19 on: September 04, 2012, 03:59:33 PM »
Updated photos.  Very happy with the work so far as usual.  The green on the t-top is a non-corrosive primer.  Then they put on a regualr primer then paint.  See the lean post that is oyster white.  Looks amazing.













Floor almost ready to go in.







Alex Buck
Bass Underwriters of Florida
800.528.5386

September 05, 2012, 12:39:46 AM
Reply #20

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11066
Re: 1984 222 CCP
« Reply #20 on: September 05, 2012, 12:39:46 AM »
Looking good Alex  :salut:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

September 05, 2012, 05:47:15 PM
Reply #21

fabuck71

  • Information Offline
  • Posts: 209
Re: 1984 222 CCP
« Reply #21 on: September 05, 2012, 05:47:15 PM »
Thanks Rick!
Alex Buck
Bass Underwriters of Florida
800.528.5386

September 06, 2012, 10:47:05 PM
Reply #22

fishinonthebrain

  • Information Offline
  • Posts: 373
Re: 1984 222 CCP
« Reply #22 on: September 06, 2012, 10:47:05 PM »
Looking good.   :thumright:

What kind of white paint was used in the bilge area? Was  a primer used?
1987 222CCP current rebuild.




September 07, 2012, 10:07:14 AM
Reply #23

fabuck71

  • Information Offline
  • Posts: 209
Re: 1984 222 CCP
« Reply #23 on: September 07, 2012, 10:07:14 AM »
Its a 2 part bilge epoxy, they only use the best epoxies!  Never any Polyester.  Bob told me something like 12 times the bonding strength over polyester?
Alex Buck
Bass Underwriters of Florida
800.528.5386

September 08, 2012, 08:38:59 AM
Reply #24

fishinonthebrain

  • Information Offline
  • Posts: 373
Re: 1984 222 CCP
« Reply #24 on: September 08, 2012, 08:38:59 AM »
Quote from: "fabuck71"
Its a 2 part bilge epoxy, they only use the best epoxies!  Never any Polyester.  Bob told me something like 12 times the bonding strength over polyester?


Alex could you ask the brand for me? I cant wait to see the hull painted.
1987 222CCP current rebuild.




September 08, 2012, 09:11:37 AM
Reply #25

saltfly

  • Information Offline
  • Posts: 434
Re: 1984 222 CCP
« Reply #25 on: September 08, 2012, 09:11:37 AM »
What brand non corrosive primer did they use?

September 09, 2012, 11:01:51 AM
Reply #26

fabuck71

  • Information Offline
  • Posts: 209
Re: 1984 222 CCP
« Reply #26 on: September 09, 2012, 11:01:51 AM »
Ill find out both for you all!
Alex Buck
Bass Underwriters of Florida
800.528.5386

September 15, 2012, 03:54:48 PM
Reply #27

fishinonthebrain

  • Information Offline
  • Posts: 373
Re: 1984 222 CCP
« Reply #27 on: September 15, 2012, 03:54:48 PM »
Please take a few pictures of how they finish off your transom. I am at that point in my rebuild. Looks good! Keep them coming.
1987 222CCP current rebuild.




September 24, 2012, 08:55:07 PM
Reply #28

fabuck71

  • Information Offline
  • Posts: 209
Re: 1984 222 CCP
« Reply #28 on: September 24, 2012, 08:55:07 PM »
Boat is looking awesome.  I'll post pictures early in the AM.
Alex Buck
Bass Underwriters of Florida
800.528.5386

September 24, 2012, 09:27:44 PM
Reply #29

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 1984 222 CCP
« Reply #29 on: September 24, 2012, 09:27:44 PM »
Looks like Zinc Chromate for the primer...


Corner of 520 and A1A...

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal