Attention: Have 2 pages to see today

Author Topic: 19-1 transom rebuild  (Read 4356 times)

June 14, 2016, 07:38:02 AM
Reply #45

Xjbob99

  • Information Offline
  • Posts: 35
Re: 19-1 transom rebuild
« Reply #45 on: June 14, 2016, 07:38:02 AM »
ive been seaching everywhere! all the builds ive been seeing theyve done the stringers throughout :41:

im debating on ending the stringers where i cut them and just adding knees. my stringers were a little wet back there when i first cut into them but they are dry now. i think it was from someone cutting half the stringer out to route the bilge hose. my stringers are also not de-laminating from the hull either. i just would feel better if the transom was tied into the stringers throughout the hull.

any thoughts on this?

June 14, 2016, 08:05:29 AM
Reply #46

mshugg

  • Information Offline
  • Master Rebuilder
  • Posts: 949
Re: 19-1 transom rebuild
« Reply #46 on: June 14, 2016, 08:05:29 AM »
Most of the builds that have added knees did it after extending the stringers back to the transom.  I guess you could make stringer extensions that also served as knees.

June 14, 2016, 08:07:41 AM
Reply #47

Xjbob99

  • Information Offline
  • Posts: 35
Re: 19-1 transom rebuild
« Reply #47 on: June 14, 2016, 08:07:41 AM »
whats the best way to extend the stringers back into the transom without having the old skin. somehow i mistaken them as trash and tossed them. is a mold my only option?

June 14, 2016, 08:32:23 AM
Reply #48

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6429
Re: 19-1 transom rebuild
« Reply #48 on: June 14, 2016, 08:32:23 AM »
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

June 14, 2016, 08:38:02 AM
Reply #49

Xjbob99

  • Information Offline
  • Posts: 35
Re: 19-1 transom rebuild
« Reply #49 on: June 14, 2016, 08:38:02 AM »
Here's a thought.

http://classicaquasport.com/smf/index.php?topic=2579.msg17956#msg17956

this is why i love this forum. everyone here is so helpful! that looks like it would work for me on 3 of the stringers. i dont think i can run a piece that far on the stringer skin i tossed with out it sagging like crazy.

June 14, 2016, 10:45:39 PM
Reply #50

Xjbob99

  • Information Offline
  • Posts: 35
Re: 19-1 transom rebuild
« Reply #50 on: June 14, 2016, 10:45:39 PM »
Just got in from laying 3 layers of 1708 for the bow side skin. Just made it with the epoxy I had left. Got more coming Friday and hope to have the stringers in by Sunday!


June 15, 2016, 01:59:30 AM
Reply #51

Woodeneye

  • Information Offline
  • Posts: 263
Re: 19-1 transom rebuild
« Reply #51 on: June 15, 2016, 01:59:30 AM »
Here's a thought.

http://classicaquasport.com/smf/index.php?topic=2579.msg17956#msg17956

This method looks like it would work exceptionally well, particularly once the deck was on, if you put some knees/gussets in to tie the deck & transom together.
*SOLD*1981 222 CCP, Westport, MA.

June 15, 2016, 10:33:03 PM
Reply #52

Woodeneye

  • Information Offline
  • Posts: 263
Re: 19-1 transom rebuild
« Reply #52 on: June 15, 2016, 10:33:03 PM »
Here's a thought.

http://classicaquasport.com/smf/index.php?topic=2579.msg17956#msg17956

This method looks like it would work exceptionally well, particularly once the deck was on, if you put some knees/gussets in to tie the deck & transom together.

Like so:
*SOLD*1981 222 CCP, Westport, MA.

June 17, 2016, 07:28:40 AM
Reply #53

Xjbob99

  • Information Offline
  • Posts: 35
Re: 19-1 transom rebuild
« Reply #53 on: June 17, 2016, 07:28:40 AM »
well made some more progress on the boat last night. cut the notch out in the transom for the outboard.



then onto figuring out these tricky stringers. i laid out my skins that i cut out and ended up scratching that idea.


i was just going through my phone and seems like i didnt take any pictures of the plywood forms i set up in the boat to pour the foam :-( but heres is a few shots of the outside stringers done. im going to fillet them in and lay 2 layers of 1708 over them.




 

SimplePortal 2.3.5 © 2008-2012, SimplePortal