Attention: Have only 1 page to see today

Author Topic: Johnson 225 tilt leaking  (Read 466 times)

December 02, 2017, 04:57:50 PM
Read 466 times

gunsgunsguns

  • Information Offline
  • Posts: 7
Johnson 225 tilt leaking
« on: December 02, 2017, 04:57:50 PM »
Hello, I have a 1995 ocean runner 225 that has fluid leaking out of the tilt piston.  Does anyone know how to fix this if it is fixable at all?
Thanks,
mike

December 02, 2017, 05:47:02 PM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11074
Re: Johnson 225 tilt leaking
« Reply #1 on: December 02, 2017, 05:47:02 PM »
There is seal kits to repair them.  Hardest part is getting to them. A mechanic that has done a few can do it within book time, me it would take way more time (like days).  I had my mechanic do it - cost $400.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

December 03, 2017, 11:13:54 PM
Reply #2

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: Johnson 225 tilt leaking
« Reply #2 on: December 03, 2017, 11:13:54 PM »
You can get a seal kit for it. Not cheap. Not easy to do either. You need a special spanner to remove the cylinder end. Also a shop crane to lift the engine. Not an easy job to begin with and even harder when things don't come apart due to corrosion.
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

December 05, 2017, 02:47:29 PM
Reply #3

gunsgunsguns

  • Information Offline
  • Posts: 7
Re: Johnson 225 tilt leaking
« Reply #3 on: December 05, 2017, 02:47:29 PM »
I’ll start looking for a mechanic. Thanks guys

January 21, 2018, 09:55:33 PM
Reply #4

Levi

  • Information Offline
  • Posts: 143
Re: Johnson 225 tilt leaking
« Reply #4 on: January 21, 2018, 09:55:33 PM »
Sometimes it's cheaper to replace the whole power trim unit with a gently used one.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal