Attention: Have 2 pages to see today

Author Topic: 240 cc inboard question  (Read 167 times)

March 21, 2017, 06:45:58 PM
Read 167 times

rmqkslvr83

  • Information Offline
  • Posts: 5
240 cc inboard question
« on: March 21, 2017, 06:45:58 PM »
I'm looking for some info on prop  pitch  and diameter for  240 inboard  I had lost the prop last season I can't seem to find any write ups or specs obviously because of the rarity any input would be appreciated

March 21, 2017, 07:44:01 PM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 8823
Re: 240 cc inboard question
« Reply #1 on: March 21, 2017, 07:44:01 PM »
Welcome aboard!!  Did you look in our gallery for info?  Not sure if the info will get down to pitch and diameter though. Maybe.
Rick
1971 "170" with 115 Johnson (Rebuilding it now)

1992 230 Explorer with 250 Yamaha

March 22, 2017, 05:30:48 PM
Reply #2

rmqkslvr83

  • Information Offline
  • Posts: 5
Re: 240 cc inboard question
« Reply #2 on: March 22, 2017, 05:30:48 PM »
I did check there have you or anyone ever seen any more information or spec sheets on these boats

March 23, 2017, 07:35:21 AM
Reply #3

Capt. Bob

  • ***
  • Information Online
  • Global Moderator
  • Posts: 5332
Re: 240 cc inboard question
« Reply #3 on: March 23, 2017, 07:35:21 AM »
What year is this hull?

Capt. Bob
1991 210 Walkaround
1991 Yamaha 200
"Reef or Madness IV"

March 23, 2017, 11:24:40 AM
Reply #4

rmqkslvr83

  • Information Offline
  • Posts: 5
Re: 240 cc inboard question
« Reply #4 on: March 23, 2017, 11:24:40 AM »
1974

April 05, 2017, 10:49:05 AM
Reply #5

emptypockets

  • Information Offline
  • Posts: 1
Re: 240 cc inboard question
« Reply #5 on: April 05, 2017, 10:49:05 AM »
i have a 1975 240 inboard "project" also, its tough finding much info on them. Boat is currently shrink wrapped but I have the prop still. Next time I see her I will try to dig it out.
 I have attached the info I have found.

April 05, 2017, 10:58:03 AM
Reply #6

wingtime

  • Information Offline
  • Posts: 3286
    • http://50newtmotorclub.shutterfly.com/
Re: 240 cc inboard question
« Reply #6 on: April 05, 2017, 10:58:03 AM »
Any good prop shop would be able to recommend a prop based on the boat and HP.  In fact they may have a prop loaner program to help you find the right prop. You also need to know your shaft diameter.
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

April 05, 2017, 07:53:51 PM
Reply #7

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 8823
Re: 240 cc inboard question
« Reply #7 on: April 05, 2017, 07:53:51 PM »
I see you attached the images - if they came from our gallery there is a much easier way to post them from the gallery.
Did you see this folder?
http://www.classicaquasport.com/gallery/showgallery.php?cat=545
Rick
1971 "170" with 115 Johnson (Rebuilding it now)

1992 230 Explorer with 250 Yamaha

May 17, 2017, 09:18:18 PM
Reply #8

rmqkslvr83

  • Information Offline
  • Posts: 5
Re: 240 cc inboard question
« Reply #8 on: May 17, 2017, 09:18:18 PM »
Thank you for ur replys I have a food idea what prop I need I was just curious what it may have came with to compare to mine ......basically to see if I have other problems like down on power, weight if some had changed the motor or trans I don't know much about the history of the boat and it's impossible to find and useful info on them the prop I have is close and I know what needs to be done to get the rpm I need I just didn't want to make changes if it's not the prop that's the problem