Attention: Have only 1 page to see today

Author Topic: Bungee tie downs for rod holders?  (Read 223 times)

January 09, 2017, 07:31:56 PM
Read 223 times

heatherwood11

  • Information Offline
  • Posts: 17
Bungee tie downs for rod holders?
« on: January 09, 2017, 07:31:56 PM »
My 1985 222CCP has the remnants of bungee straps on the teak rod holders (on the sides).  I have checked out the vendor section and posts and have checked google/online and can't seem to find replacement bungees for this purpose.  Any ideas?  I'm guessing they would need to stretch 3-4 inches or so.  Without them, rods seem to bounce out in chop and while trailering.  Thanks for your help/thoughts.  Jason

January 09, 2017, 08:00:30 PM
Reply #1

mshugg

  • Information Offline
  • Posts: 567
Re: Bungee tie downs for rod holders?
« Reply #1 on: January 09, 2017, 08:00:30 PM »
You can buy loose bungee and some SS Hog rings and make your own. 
http://www.boatoutfitters.com/stainless-steel-hog-rings?gclid=CPzcw-GvttECFRc7gQod2mAHyg
The pliers to crimp the rings are inexpensive.

January 09, 2017, 08:56:34 PM
Reply #2

heatherwood11

  • Information Offline
  • Posts: 17
Re: Bungee tie downs for rod holders?
« Reply #2 on: January 09, 2017, 08:56:34 PM »
Thanks again...this will work perfectly.