Classic AquaSport

Aquasport Model Rebuilds, Mods, Updates and Refreshes => Generic Aquasport Rebuilding Topics => Topic started by: heatherwood11 on January 09, 2017, 07:31:56 PM

Title: Bungee tie downs for rod holders?
Post by: heatherwood11 on January 09, 2017, 07:31:56 PM

My 1985 222CCP has the remnants of bungee straps on the teak rod holders (on the sides).  I have checked out the vendor section and posts and have checked google/online and can't seem to find replacement bungees for this purpose.  Any ideas?  I'm guessing they would need to stretch 3-4 inches or so.  Without them, rods seem to bounce out in chop and while trailering.  Thanks for your help/thoughts.  Jason

Title: Re: Bungee tie downs for rod holders?
Post by: mshugg on January 09, 2017, 08:00:30 PM

You can buy loose bungee and some SS Hog rings and make your own. 
http://www.boatoutfitters.com/stainless-steel-hog-rings?gclid=CPzcw-GvttECFRc7gQod2mAHyg
The pliers to crimp the rings are inexpensive.

Title: Re: Bungee tie downs for rod holders?
Post by: heatherwood11 on January 09, 2017, 08:56:34 PM

Thanks again...this will work perfectly.