Attention: Have 2 pages to see today

Author Topic: 87' 22-2 CCP rebuild  (Read 448 times)

February 24, 2020, 06:15:20 PM
Read 448 times

chartersport

  • Information Offline
  • Posts: 4
87' 22-2 CCP rebuild
« on: February 24, 2020, 06:15:20 PM »
A month ago I took purchase of a 87’ Aquasport 22-2 CCP. I purchased it from a colleague, who had already redone the majority of the boat. He bubble leveled the boat, redid the stringers, new 80 gallon fuel tank, rigging tube, rigging wires, few foam, enclosed the transom, and a few more things. So far I have put in the deck ( 2 layers of glass), console done, transom faired out and painted, and livewell built. I have a 2007 225 Yamaha 4 stroke with a Atlas bracket with a 14” setback. Should be mounting it mid next week. Have a lot more work to go, but hopefully will be done around late April so I can add her to the charter fleet and get after it. Look forward to sharing the pics along the way. Any advice is appreciated. Thanks!

February 24, 2020, 06:19:19 PM
Reply #1

chartersport

  • Information Offline
  • Posts: 4
Re: 87' 22-2 CCP rebuild
« Reply #1 on: February 24, 2020, 06:19:19 PM »
My fiberglass guy did the vail work on my top cap today and top of the gunwales where the gelcoat was cracked and had come up. The work came out great. He matched the gelcoat flawlessly. I compounded the hull and see came right back. Tomorrow I will finish the compounding the hull and also attach the Atlas bracket tomorrow. She is coming along great. More pics to come tomorrow.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal