Attention: Have 2 pages to see today

Author Topic: 2000 Aquasport Explorer 250 Hathes  (Read 171 times)

April 18, 2018, 09:28:08 PM
Read 171 times

treyj2535

  • Information Offline
  • Posts: 1
2000 Aquasport Explorer 250 Hathes
« on: April 18, 2018, 09:28:08 PM »
The hatches on my boat need replaced.  There are two hatches and a spacer.  These are the hatches for the live well. I have not been able to find replacement hatches anywhere, one is good one is very soft.  Anyone know of a boat hunk yard or anything that might have these?  It’s pretty costly to get a mold and have it remade.  Any help or direction would be appreciated

April 19, 2018, 04:07:04 AM
Reply #1

mshugg

  • Information Offline
  • Master Rebuilder
  • Posts: 949
Re: 2000 Aquasport Explorer 250 Hathes
« Reply #1 on: April 19, 2018, 04:07:04 AM »
It should be possible to cut the core out of the hatches from the back side.  Then grind down to clean glass.  Bond in a new core and glass over the core.  It’s easier to describe than doo, but still manageable.  It wouldn’t be a bad first glass project, or if you’d prefer to hire it out, it shouldn’t break the bank.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal