Menu
You reached the limit of pages to see for today
« previous next »
Pages: 1 2   Go Down

Author Topic: 1978 170 rebuild  (Read 1008 times)

September 28, 2015, 06:17:53 PM
Reply #15

Bglhooked

  • Information Offline
  • Posts: 12
Re: 1978 170 rebuild
« Reply #15 on: September 28, 2015, 06:17:53 PM »
 Yes. A plywood transom made of (2) pieces of 3/4 marine plywood. The deck will be 5/8 marine plywood I think.
Logged
September 29, 2015, 03:38:07 PM
Reply #16

larsli68

  • Information Offline
  • Master Rebuilder
  • Posts: 527
Re: 1978 170 rebuild
« Reply #16 on: September 29, 2015, 03:38:07 PM »
OK, cool. I used Seacast, but if I had known the amount of work involved in getting the wood out of the transom, I would have gone plywood too.
Sealed correctly it will last you a long time.
//Lars
Logged
October 02, 2015, 07:38:54 PM
Reply #17

Bglhooked

  • Information Offline
  • Posts: 12
Re: 1978 170 rebuild
« Reply #17 on: October 02, 2015, 07:38:54 PM »
Rain slows projects.
Logged
October 05, 2015, 06:01:24 AM
Reply #18

Bglhooked

  • Information Offline
  • Posts: 12
Re: 1978 170 rebuild
« Reply #18 on: October 05, 2015, 06:01:24 AM »
Made a pattern for the transom replacement but I am questioning if I should raise it to 25". Is it hard to find a 25" 90hp outboard? I don't have a motor yet to put on it. I like the 25" but what do you guys think??
Logged
October 05, 2015, 06:24:38 AM
Reply #19

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11074
Re: 1978 170 rebuild
« Reply #19 on: October 05, 2015, 06:24:38 AM »
25" is no problem to find.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
October 06, 2015, 07:48:29 AM
Reply #20

Bglhooked

  • Information Offline
  • Posts: 12
Re: 1978 170 rebuild
« Reply #20 on: October 06, 2015, 07:48:29 AM »
That's all I needed to hear. Raising it!!
Logged
Pages: 1 2   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal