Pictures of Aquasport Capacity Plates

[RickK]

Here is a link to images of capacity plates that we received from Aquasport.  Can you copy it and take it to a printer for replication - not sure.
http://www.classicaquasport.com/gallery/showgallery.php?cat=766

[Capt. Bob]

Very interesting.

Hull is a 1993 210 Explorer



On closer examination the plate is stamped for a "230 Walkaround".
Might have been left over from a batch circa 1991 when they were still labeled WACs or just an outright "oops".

[Georgie]

Here's the plate from my 246 CCC which also reads as if it's a 246 FF.

[RickK]

Here's the plate from my 246 CCC which also reads as if it's a 246 FF.

That's weird. Apparently the capacity is the same though.

[Aquamaniac]

Here is a pic of my 1973 170's plate:
Max HP 130 (surprised me!)
Max persons 795 (also surprised me....a crowd or a few whoppers!)
Max capacity persons,motor,gear 1575 (that 90hp four stroke is a chunk of that!)
 

[Callyb]

I searched and searched, but came up empty... I would appreciate, if anyone has a pic of one, to post it please. I have a 1997 model that needs a new one made.

Thanks,

[Capt. Bob]

I searched and searched, but came up empty... I would appreciate, if anyone has a pic of one, to post it please. I have a 1997 model that needs a new one made.

As close as I can get.

[THE SHADOW]

Edit:
Taken from member "Wayne'sWorld" post 8 Nov. 2009:

Here is the exact wording, line by line, on the capacity plate.  The AS is an '86:

MAXIMUM CAPACITIES
9 Persons or 1200 LBS.
2000 LBS. Persons, Motor, Gear
245.0 H.P. Motor
This boat complies with US Coast Guard safety
standard in effect on the date of certification
Model: 222 CCP O/B              AQUASPORT, INC.
                                         HIALEAH, FLORIDA
Design Compliance with BIA Requirements Below is
Verified: MFGR. Responsible For Production Control

Load and HP capacity/Level Flotation/Steering and Electrical System
Compartment Ventilation/International Lights

Certified BIA (emblem)      National Marine Manufacturers Association

Hello
New owner of a 222 ccp of 1988, I count that my boat does not have plate of capacity ...
After research, I followed this thread ... and I am perplexed in front of this track.
9 people on this boat ?? ... seriously ?? 

[Sergdm86]

Hello everyone, i have an 86 aquasport 250xf, just bought at the end of this past summer... I was wondering if anyone knows how to purchase the metal capacity weight or people for the boat. The one on there now is unreadable, and i am not an experienced person. This is all new to me. Any help would go a long way. Thank you all

[RickK]

See if you can find what you need in this topic, then you can get one printed locally.
https://classicaquasport.com/smf/index.php?topic=9149.0

[Capt. Bob]

Hello everyone, i have an 86 aquasport 250xf, just bought at the end of this past summer... I was wondering if anyone knows how to purchase the metal capacity weight or people for the boat.

OK,
I merged your thread with the one listed in Rick's link. If you want to replace your capacity plate then you either need a photo of a member's plate with your model Aqua or get somewhat creative. Then you can order a reproduction made. This repo will be vinyl rather than metal but will do the same thing.

A quick search of the thread linked (this thread you're reading) doesn't show an exact match for your year and model so let's get creative.

What we know:
86 XF tells us the Manufacturer is Aquasport Inc. and was built in Hialeah Florida.
Model 250XF can be found in the Photo Gallery under Documentation. Let's see.



We see max HP is 300

Now, browsing the thread we find this:

Click this link.
https://classicaquasport.com/smf/index.php?topic=9149.msg83579#msg83579

This is for a Genmar 250/Osprey/EX but is close enough (IMHO) to your XF hull (CCP hull with XF cap) that you could use the remaining info on Persons 8 1200 lbs 4300 lbs Persons, Motor, Gear

Now you have enough info to create your sticker which you will do here.

https://garzonstudio.com/capacities-decal/4x3-b.html

There ya go. All of this is in this thread but hey, first one's always free.

Good luck

[Sergdm86]

Thank you so much Capt. Bob!!

[Hunthard]

just picked up a 1994. 20ft cc osprey.  haven't seen the capacity plates can anyone tell me what it should be.
boat has a yami 150. thanks.

[Capt. Bob]

Comparing your hull specs with various models, this is as close as I can get.



HP capacity is correct and the hull weights are similar. You can make it anything you want but these numbers will be close.

Good luck.

[82aqua200ccp]

 New to this site but my 1982 200 CCP is in need of a new COAST GUARD plate and I cannot read a thing off the old one.  Was wondering if anyone has the info off the same model ?    Thanks....Ed.