Attention: Have 2 pages to see today

Author Topic: 222 ride quality  (Read 912 times)

August 28, 2018, 04:36:14 PM
Read 912 times

bjgiii

  • Information Offline
  • Posts: 4
222 ride quality
« on: August 28, 2018, 04:36:14 PM »
After reading as much as can, I really can’t find many opinions on the ride on a 222 semi v. I realize the boat is an older design, but how do they compare to a modern day bay boat?

August 28, 2018, 06:42:08 PM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11074
Re: 222 ride quality
« Reply #1 on: August 28, 2018, 06:42:08 PM »
Any of the Osprey line (12 degree) ride great and draw only about 7-9 inches - great performing boats.  There is one company that agreed enough to make a near identical knock off of the 222.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

August 28, 2018, 11:12:08 PM
Reply #2

boatnamesue

  • Information Offline
  • Posts: 564
  • Jason
Re: 222 ride quality
« Reply #2 on: August 28, 2018, 11:12:08 PM »
If not identical then certainly near replica's....Dorado, Sheaffer, Exuma, Gause,...just a few.  A more appropriate and accurate query would be how do modern day hulls compare to that of the AS222, since the latter is the pioneer hull.
---------------
Jason
1976 AS 170
1998 S115TLRW

August 30, 2018, 10:05:48 AM
Reply #3

bjgiii

  • Information Offline
  • Posts: 4
Re: 222 ride quality
« Reply #3 on: August 30, 2018, 10:05:48 AM »
If not identical then certainly near replica's....Dorado, Sheaffer, Exuma, Gause,...just a few.  A more appropriate and accurate query would be how do modern day hulls compare to that of the AS222, since the latter is the pioneer hull.
Are you saying I should be asking how the AS compares to the modern day builders that got their design from the 222 model?

August 30, 2018, 12:20:18 PM
Reply #4

theFunsmith

  • Information Offline
  • Posts: 265
Re: 222 ride quality
« Reply #4 on: August 30, 2018, 12:20:18 PM »
I think what he was implying, is that as the original, it is the gold standard in that style of boat. And that if it wasn't a performer, that it wouldn't have been copied so many times.

August 30, 2018, 02:42:21 PM
Reply #5

bjgiii

  • Information Offline
  • Posts: 4
Re: 222 ride quality
« Reply #5 on: August 30, 2018, 02:42:21 PM »
Gotcha. Its been years since I rode in one. My Grandpa had one. With the current cost of most flats and bay boats going up 5%+ each year, they seem like a real winner.

August 31, 2018, 02:56:00 AM
Reply #6

Woodeneye

  • Information Offline
  • Posts: 263
Re: 222 ride quality
« Reply #6 on: August 31, 2018, 02:56:00 AM »
I have a 1981 222 CCP and every time I take it out front I'm amazed at how good it is in the chop. Particularly when you factor in it being over 30 years old and only 22feet. Sure some days will knock your fillings out if you push it but I'd suggest any boat of that length would. Just my $0.05
*SOLD*1981 222 CCP, Westport, MA.

August 31, 2018, 07:48:25 AM
Reply #7

mshugg

  • Information Offline
  • Master Rebuilder
  • Posts: 949
Re: 222 ride quality
« Reply #7 on: August 31, 2018, 07:48:25 AM »
Every boat design is a compromise.  The 12 degree Ospreys are designed to be efficient and to fish in shallow water.  The trick to have a decent ride is to keep the bow down, and if necessary, slow down. 

Some newer boats give you a sharper entry and more flair.  These can offer a smoother and dryer ride.  Some people will say that nothing short of a 30’ Boat with a 24 degree deadrise rides well. But a lot of us really like these older hulls.  The Osprey series is one of the most popular and often imitated line of boats ever.    If you stay within the limits of the hull, you can weather some nasty stuff.




August 31, 2018, 09:58:26 PM
Reply #8

boatnamesue

  • Information Offline
  • Posts: 564
  • Jason
Re: 222 ride quality
« Reply #8 on: August 31, 2018, 09:58:26 PM »
I think what he was implying, is that as the original, it is the gold standard in that style of boat. And that if it wasn't a performer, that it wouldn't have been copied so many times.
^^^^Exactly
---------------
Jason
1976 AS 170
1998 S115TLRW

September 02, 2018, 12:33:13 AM
Reply #9

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: 222 ride quality
« Reply #9 on: September 02, 2018, 12:33:13 AM »
The 222 and 19-6 12 degree semi vee is the original bay boat. As mentioned many companies have flat out copied or made minor changes to the design and called it their own.

The 222 CCP is a different hull with a 19 degree deadrise.
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

September 03, 2018, 06:07:09 PM
Reply #10

Woodeneye

  • Information Offline
  • Posts: 263
Re: 222 ride quality
« Reply #10 on: September 03, 2018, 06:07:09 PM »
The 222 and 19-6 12 degree semi vee is the original bay boat. As mentioned many companies have flat out copied or made minor changes to the design and called it their own.

The 222 CCP is a different hull with a 19 degree deadrise.
Opps. I get my 222 & CCP's mixed up, bloody confusing. Doh.
*SOLD*1981 222 CCP, Westport, MA.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal