You reached the limit of pages to see for today

Author Topic: How much sponginess/softness in deck is too much?  (Read 362 times)

June 01, 2018, 01:55:12 PM
Read 362 times

northeast-aquasport

  • Information Offline
  • Posts: 4
How much sponginess/softness in deck is too much?
« on: June 01, 2018, 01:55:12 PM »
I'm looking at buying a 222 from the 1970s or 80s (owner isn't sure of the year) and could use some advice about whether the deck is too springy/spongy. Here's a video showing how springy it is along the port side.
https://vimeo.com/272995740
It's similar on starboard side.

It seems pretty springy to me. Since I don't want a restoration project I'm thinking maybe I should pass on this boat. But this would be my first time owning an Aquasport, and I'd appreciate advice from you all about it.


June 01, 2018, 02:30:08 PM
Reply #1

fitz73222

  • Information Offline
  • Mechanical Master
  • Posts: 1957
    • http://www.hudson-technologies.com/.
Re: How much sponginess/softness in deck is too much?
« Reply #1 on: June 01, 2018, 02:30:08 PM »
Looks very springy, not much core left in that deck. It appears to be a 70's model
1973 Aquasport 22-2, twin 115 Mercs
2000 Baycraft 175 flats boat, 60 Bigfoot Merc
1968 Boston Whaler 13, 25 Yamaha (project)
1966 Orlando Clipper 13, 9.9 Merc

June 02, 2018, 08:27:37 AM
Reply #2

RickK

  • *****
  • Information Online
  • Administrator
  • Posts: 11080
Re: How much sponginess/softness in deck is too much?
« Reply #2 on: June 02, 2018, 08:27:37 AM »
You are walking between the 2 stringers - is it like that on the other side of the console?  I caught glimpses of the cap on the boat, looks like a 3 piece boat?  - could it be a flatback?
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

June 02, 2018, 11:40:53 AM
Reply #3

northeast-aquasport

  • Information Offline
  • Posts: 4
Re: How much sponginess/softness in deck is too much?
« Reply #3 on: June 02, 2018, 11:40:53 AM »
Yes, it was also springy on the starboard side of the console.

I'm pretty sure it is not a flatback. I haven't seen it out of the water, but just looking at the bottom of the transom in the water it had a slight V, not just flat.

June 02, 2018, 01:49:01 PM
Reply #4

RickK

  • *****
  • Information Online
  • Administrator
  • Posts: 11080
Re: How much sponginess/softness in deck is too much?
« Reply #4 on: June 02, 2018, 01:49:01 PM »
You said the boat is a 222? The glimpse of the front portion of the cap above the casting deck, with the boxy thing, looks familiar.
This is a '74 and you can see the box up under the cap in the front.  The cap looks the same along the sides too.


You can see the stringer layout in this pic


Here is a 80's 222 - you can see a liner now


So Farley (fitz73222) nailed it (he has the same cap as in the video).   :nSalute:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal