Attention: Have only 1 page to see today

Author Topic: Console Dimensions for Tower-1975 Aquasport 222  (Read 322 times)

April 13, 2018, 10:44:21 AM
Read 322 times

rackemup

  • Information Offline
  • Posts: 9
Console Dimensions for Tower-1975 Aquasport 222
« on: April 13, 2018, 10:44:21 AM »
I'm in the process of getting my '75 Aquasport 222 completely rebuilt from bow to stern. I've kinda hit a wall and am looking for some advice from yall's expertise. I will be putting a tower on this boat so what dimensions do y'all recommend? I think I've made up my mind with 31" wide but what about the height and depth (from stern to bow)?

Any help/advice on dimensions or where to get a console would be greatly appreciated!

April 13, 2018, 01:22:28 PM
Reply #1

mshugg

  • Information Offline
  • Master Rebuilder
  • Posts: 949
Re: Console Dimensions for Tower-1975 Aquasport 222
« Reply #1 on: April 13, 2018, 01:22:28 PM »
My suggestion would be to pick your console, then tuck the legs of your tower as close to the console as your welder can get them.    A consult with your welder would be smart too, since he may have a minimum footprint recommendation in relation to your intended height.

April 19, 2018, 08:11:48 PM
Reply #2

Blue Agave

  • Information Offline
  • Posts: 1495
Re: Console Dimensions for Tower-1975 Aquasport 222
« Reply #2 on: April 19, 2018, 08:11:48 PM »
I recommend a narrow console, the original console is definitely too wide.  With a narrow console and tower or T-Top one will be able to walk around the boat much easier.

1975 19-6
3.0 EFI Mercury 150 4S
"Don't count the days make the days count." - Muhammad Ali

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal