Classic AquaSport
Aquasport Model Rebuilds, Mods, Updates and Refreshes => Generic Aquasport Rebuilding Topics => Topic started by: TheKid on May 29, 2019, 11:25:13 AM
-
I cant seem to find the original clear inspection plate for my 79 222FFV.
They sell 4" "see throughs" but all are 1/4" too big in diameter.
I dont really want to bust out the router for this. The lip is recessed in the coffin lid.
Anyone know where to purchase a 4.2"OD inspection plate?
THanks.
-
I guess the correct term is cut out.
I need a clear inspection hatch with a 4.25" cutout and 5 5/8 OD.
Greatly appreciate the help
-
If I remember correctly, the several that I replaced like yours I had to move up just a little in size. The clear ones I thought were a little small anyway. I liked having a little bigger size for access.
-
Most of the ones used by the factory were made by Rabud in Florida. I think Dusky online sells them very reasonably.
-
Most of the ones used by the factory were made by Rabud in Florida. I think Dusky online sells them very reasonably.
I've been looking high and low. The Rabud is as close as I'm going to get.
At least I dont have to mill out the recess for the OD. That was probably the main concern. I did not want to chip the gel and glass.
Thanks guys.